mx axle width

[Lquad71]

so i got a new axcalibur axle and it is +3 over all. there are three .5" on each side...my front end is +2.25 on each side. should i run it as wide as i can or should i take one spacer off each side.

[Lquad71]

sorry it doesnt say what three .5" are...
im talking about spacers...there are three .5" spacers on each side

[Balaz_73*00]

Put 2 on the inside of the hub, 1 on the outside and I think ull be happy like that. That's how I'm running mine