PDA

View Full Version : Getting reay to part out ... 1999 300ex



86trizinger
09-05-2009, 08:08 PM
I am thinking of parted my 1999 300ex or maybe sell it complete

I have the complete bike with nothing wrong with it.. I just do not use it. Itsbeen a pain to sellcomplete bike in teh past so I want to see how much interest in the parts.

-Engine start right away.. Great power.. no smoke. Everything goes with engine.. wiring and carb

-Maier red plastic.. Front is perfect shape.. Rear is a little melted right where the pipe meets the muffler due to a bad gasket. Needs tank cover though.. $36 to replace

-Durablue rear axle

-Holeshot front and rear tires on stock aluminum wheels.. Not very old .. a little clay stained though.

-Rental handle bars

-All brakes are perfect.. new pads on rear about 5 hours on them.. Have new front pads to with them.

-Everything works on this bike even have a brand new battery in it... I also have a freshly painted 250x frame that I was going to swap it over to and re do it.

-All front end bushing are good.. I think one tie rod end may be a little loose. . Havent had a chance to check and see if it is just loose though.

Rear shock has external resevoir... not sure of brand Doesn't leak
Front shocks are stock but look almost new and have red dust covers on them.

Once the engine setup is sold then I will part out the rest.

I am in Maryland 21034 zip code.

IRISH-RACER-14
09-06-2009, 07:19 AM
send pics of handlebars and rear shock to

2006trx300ex@gmail.com

86trizinger
09-06-2009, 10:28 AM
repairing our shed today and painting it.. WIll try and get pics tonight.

mitchgncc711
09-06-2009, 07:55 PM
pics of red maier plastic hondarider994@yahoo.com

storms400ex
09-06-2009, 09:29 PM
you have a taillight???

Redrider99
09-07-2009, 06:46 PM
want the set of maiers!! pmed you

86trizinger
09-08-2009, 01:54 PM
650 for the complete engine harness and carb. Complete and running

coreo5
09-08-2009, 05:20 PM
sell the clutch cable holder thing..no clue whats its called. bolts onto the motor and the clutch cable goes through it to hold the cable tight...make any sense?

86trizinger
09-10-2009, 10:20 AM
Need to sell the engine first.. before I can part all the smaller parts out..

Someone is coming tonight to look at the complete bike.

djcluejs
09-16-2009, 05:41 AM
how much for the tires and the size and tread left thanks.

dirtdawg
09-16-2009, 12:24 PM
what shape are the tie rods and ends in? how much shipped to 02832? pics?

stuntin andy
10-26-2009, 05:47 AM
frame good condition?!?!.... let me know post pictures