where is everyone getting there bb pistons??

[2-330s]

i can't find wiseco 330-350 pro x pistons??:confused: :grr: all i can find are the wossner. and you have to get them trough ct or esr ect ect.

[Honda 250r 001]

get the strait from pro x. you pretty much just have to get it from a company such as ct, esr etc etc.

[2-330s]

i don't want a cast piston.

[machwon]

ESR should send you a Wiseco. I've been relying on them more lately. CT seems to send you whatever they get a good deal on.

[deathman53]

wossner pistons seam to be forged also, I have 2 of them. I can tell a difference between a pro-x and forged easy.

[IcutMetl]

Aren't wossner only a 1-ring piston? How do they hold up compared to a Wiseco...any comparative data?

[86 Quad R]

Originally posted by IcutMetl
Aren't wossner only a 1-ring piston? How do they hold up compared to a Wiseco...any comparative data?

i'd like more info on this aswell. any info would be great. :cool:

[2-330s]

the 2 pistons that are in my stumped thread are wossner. they are 2 ring forged and have some sort of coating on the skirt when you get them. they seem to be a good quality piston but between those 2 pistons i only have three laps of practice:mad: :mad:

[Fear250r]

I have a wossner piston in my bike and it seems to be just fine so far. Around 15-20 gallons run through it, no problems. I think it's a moly coating on there.

[2-330s]

i have heard apticote (idk if that's spelled rite) but i don't know for sure the pistons might be fine. but i'm trying to figure out what went wrong. igot pissed off and threw that cylinder in a box until now. time to see whats going on

[86 Quad R]

so where's the best place to get the wossner pistons and how do they compare in price to wiseco?

[SuperSherman]

I beat the hell out of a Wossner 295 flat toped piston at 220lbs compression for 40 or so hours and it came out looking good. The coating was gone right quick though. I'll buy another one for sure.

[mxduner]

Originally posted by 86 Quad R
so where's the best place to get the wossner pistons and how do they compare in price to wiseco? i found wossner by googling my p/n (w845ps) thats standard bore 310 kit. my search came up with esr to name 1.When i called up to order it, they told me the wiseco is better. The guy on the phone did not have a reason why.

funny thing is, when i had neil build my 310, he used wossner, and it was actually cheaper.

it is a 2 ring piston to and you can order them straight from la sleeve, or even neil.i dont see nothing wrong with them.

[2-330s]

got 1 from ftz 1 from ct. they were about the same price as the wiseco

[86 Quad R]

thanks i appreciate it. :cool:

[kookennay]

I HAVE A RESLEEVE IN MINE AND SOMEONE PUT SNAP RINGS IN INSTEAD OF CIRCLIPS AND ONE BROKE AND SCRATCHED THE CYLINDER. BUT I HAVE BEEN LOOKING TO GET A LITTLE BIGGER THAN A 72MM BUT LA SLEEVE JUST OFFERS THE 72MM, UNLESS I JUST DIDNT SEE IT.

[Honda 250r 001]

Originally posted by 86 Quad R
i'd like more info on this aswell. any info would be great. :cool:

wossner is exactly like a wiseco,

two wrings,

electra coated,

i think there made by weiseco actually.

[mxduner]

Originally posted by kookennay
I HAVE A RESLEEVE IN MINE AND SOMEONE PUT SNAP RINGS IN INSTEAD OF CIRCLIPS AND ONE BROKE AND SCRATCHED THE CYLINDER. BUT I HAVE BEEN LOOKING TO GET A LITTLE BIGGER THAN A 72MM BUT LA SLEEVE JUST OFFERS THE 72MM, UNLESS I JUST DIDNT SEE IT. a 72mm p/n from wossner is w845ps, the s i assume means standard.A .010 over p/n is w845p1, the 1 on the end for .010 over, and it goes to w845p2 for .020, up to .040 for the 310 kits.

[2-330s]

they are german look up there web site

[kookennay]

ok i will check them out thanks and i found them on lasleeve now