PDA

View Full Version : tranny


sand45
08-26-2009, 02:27 PM
ok it poped out of third gear.......Now no.... gear works. Anyone have this happen to them...any ideas before i split the cases?
Ride1Rob
08-26-2009, 03:39 PM
These Jailing motors have some of the strongest trannies you can get in terms of pitbike motors. It may be your shift forks are gone but I'm looking toward your crank again. That's the ONLY flaw with this motor is the crank because of the weight distribution.
sand45
08-26-2009, 10:01 PM
I took the side cover off the flywheel and everything seems fine ..... Is there another place i should also look at?
sand45
08-27-2009, 04:15 PM
i need a flywheel puller.....any other bikes puller work?? or is this special?

Thanks
Ride1Rob
08-27-2009, 08:14 PM
Go on ebay and check for pitbike flywheel puller. I'm thinking shift fork if it's not the crank.
sand45
08-28-2009, 09:44 AM
The one thing i did find so far is the plastic oil pump gear is broke in half...
sand45
08-30-2009, 05:36 PM
I need a Clip/keeper...that keeps the shift fork in place on the drum.....anyone have a extra or of a old motor???

thanks
Ride1Rob
08-31-2009, 02:35 AM
I think I have one at the house. Will have to check to be sure. But if you ordered that Lifan this motor will be a paper weight once the Lifan goes in.
sand45
08-31-2009, 11:40 AM
Ya i know but i would like to have it all together anyways.....i hate having stuff all apart :D

Let me know on the clip.......

Thanks