What a-arm/swingarm setup are you running

[PATTE440]

I have a 2004 trx450r and im running elkas all around with stock arms and swinger. This winter the shocks are gonna go to GT Thunder for a rebuild. I am wanting to go with possible +1+1 arms and a +1-1.25 swinger. Im not wanting to go with LT a arms due to the cost vs. my need for them. What setup are you all running on your XC quads. and what front wheel off set are you running. Thanks

[kdawgwoody]

I'm running the ARS FX 46.5" XC arms up front with the absolutly amazing EXIT shocks, such a great set up, left the stock swinger on but went again with the ARS FX stock replacement linkage, with the EXIT rear as well. the bike works great and I'm loving how great the suspension works.

[BlaineKaiser450]

for the rear, a stock 2006+ swingarm with a LSR link is the perfect setup

[PATTE440]

Originally posted by BlaineKaiser450
for the rear, a stock 2006+ swingarm with a LSR link is the perfect setup

what is the length gained with the 06+ swinger. did you have to modify it for bolt up. i thought i heard that the 06 motor was different and would not allow you to bolt up the swinger.

[06 Honda 450R]

you gain about 3/4 of an inch... the motor doesnt matter