MX gearing for a banshee

[flint250trx]

Well I set up my banshee for track/ trail. I will just be out racing for fun and will mainly be on the trails. I have just about everything done except the proper gearing. Right now i have a 14T up front and a 38T in the rear. I runf 20' tires in the front and 18' in the rear. With a -2' roundhouse swing arm. I know you guys are used to dealing with 450's and 400's but any help you can throw my way would be great.

Thanks alot guys

Josh

[honda400ex2003]

i think that would be pretty good with the 18's. mmaybe go down one more tooth in the front or up 2 on the back. that may be too much though so maybe only one in the back would be better. it should be pretty low already with the 18's instead of 20's. just my .02 though, steve

[flint250trx]

Thanks for the infor. I havent really had a chance to hit the track with it yet. I have a buch of other parts to throw on it then I will take it out.

Thanks again

[honda400ex2003]

no prob good luck with the machine. steve