dasa jetting question

[snacob14]

all of you with a dasa pipe, here's my setup what do you recommend for jetting
006 450er:
Dasa full exhaust
hrc cam
open airbox with filter skin

what are you guys running for
Main:
Needle Clip:
Pilot circuit:

[snacob14]

ttt, I think my pilot is too small. i'm running a 45, moving up to a 48

[TJ Bradley]

I have an 05 with the DASA classic. Ported head, +1 valves, HRC cam, and a stock piston right now. I run 190 main jet on mine with the stock piston, 205 with the 13.5:1 JE.

[jjm400ex]

168 mj third groove down on needle, 45-48 pilot

[airmobile101]

Originally posted by snacob14
ttt, I think my pilot is too small. i'm running a 45, moving up to a 48
Hmmmmm, I run a 42.

[snacob14]

i'm running a 48 now, just can't really tell the difference. Doesn't run any smoother, but the pilot screw is turned out 1 turn.

[airmobile101]

Originally posted by snacob14
i'm running a 48 now, just can't really tell the difference. Doesn't run any smoother, but the pilot screw is turned out 1 turn.
You need to get the bike warmed up and then put a tach on it, it makes it alot easier to adjust it.

[snacob14]

the tach is on order.

[ds268]

172 main, 48 pilot, needle 3rd clip is a common setup for a combo like that around here.