motoxgirl419
08-18-2009, 05:49 PM
I have a very large amount of parts from our 90 supermod and want to try and sell them as a packaged deal instead of trying to split everything up. This will make sumbody a very good deal fixing i have a small fortune in all of these parts. All the parts are for 2001-2004 CR85s.
1. Tery Varner built supermini motor complete from stator to carb v-force reeds 1 race on replated cylinder and complete rebuild top to bottom.
.2. Rich Hetrick built supermini motor complete from stator to carb has boyssen power reeds and has just break in time on complete top end. This is his V-ROD cylinder and is very fast.
Parts List:
2 stroked cranks 1 for the varner and 1 for the hetrick
2 sets of extra cases machined for the bigger cranks
2 stock cranks
tons of misc. pistons, rings
gaskets, bearings,etc.
3 d-slide cr 85 carbs
extra reed blocks, intake boot
DEP head pipe
Pro- Circuit complete exhaust system
sprockets
cdi boxes
coils
trans parts
clutch parts spring, plates all brand new still in packages
stock parts as well like pipe, radiator, cylinder,head, ect.
the list can go on and on but there is the majority of the parts. Just selling it all due to putting a crf 150 on for next year.
The motors that i have are very fast and have a lot of power.
There is over 5000.00 in motor work just to the two motors alone.
Asking price is 3500.00 obo
If you have any questions feel free to ask and i will get back as soon as possible. thanks Jamie
1. Tery Varner built supermini motor complete from stator to carb v-force reeds 1 race on replated cylinder and complete rebuild top to bottom.
.2. Rich Hetrick built supermini motor complete from stator to carb has boyssen power reeds and has just break in time on complete top end. This is his V-ROD cylinder and is very fast.
Parts List:
2 stroked cranks 1 for the varner and 1 for the hetrick
2 sets of extra cases machined for the bigger cranks
2 stock cranks
tons of misc. pistons, rings
gaskets, bearings,etc.
3 d-slide cr 85 carbs
extra reed blocks, intake boot
DEP head pipe
Pro- Circuit complete exhaust system
sprockets
cdi boxes
coils
trans parts
clutch parts spring, plates all brand new still in packages
stock parts as well like pipe, radiator, cylinder,head, ect.
the list can go on and on but there is the majority of the parts. Just selling it all due to putting a crf 150 on for next year.
The motors that i have are very fast and have a lot of power.
There is over 5000.00 in motor work just to the two motors alone.
Asking price is 3500.00 obo
If you have any questions feel free to ask and i will get back as soon as possible. thanks Jamie