Need Help: putting mx pipe on a Pro shark 90

[r1rider98]

I had to take to reverse off to get the pipe on. Now my problem is putting it back. The reverse don't fit. So i guess i have to take it off completely? If i have to, how does the sprocket go back on. Or what part do i need? The salesman at Westcoastquads said nothing about having to take the reverse off. Thanks in advance for any help i might get.

[marsrace2]

I do not think any of the MX Style pipes will work with reverse. I wouldnt really worry about the reverse unit, just leave it off.

[gocroom]

Contact Gary /G-force I have a Pro Shark 90 with reverse he told me he can get a pipe that will work with the reverse in tact,also 2005/2006 pred.90 has reverse and u can get a pipe for them I be getting one ordered towards the end of the month

[r1rider98]

Well, i already installed the pipe and i did find one that would work with the reverse and if you would like to know, it is a Trinity for a Kesea. I don't know if they will take the pipe back. So i need to buy a sprocket i guess is what i found out today. I could get it from WCQ but they want too much for it. So if anybody knows where to get one cheap let me know please. Thanks

[r1rider98]

Is this what i need? http://www.g-forcepowersports.com/sprockets1.html

[r1rider98]

Anybody know? Or does anybody have any pics of a Pro Shark 90 with reverse that has been removed. email me at r1rider98@sbcglobalnet. thanks

[nordic quad]

What are you looking to gain with a new sprocket,higer top speed?We use 19 and 20 tooth on our Apexes.What about your clutching with a higher rpm pipe?

[r1rider98]

I am putting an mx pipe on it and have to remove the reverse so i need a new sprocket. So i am told.

[mini racer #39]

You should not need a different sprocket. Call Billy Holt he can help you relocate the reverse and or anything else to install your new pipe. (251)675-9906

Jerry

[r1rider98]

I tried to call him he has not returned my call.