400ex axel question

[spearman_929]

ok my cousins quad the bearings went out and it chewed up the sprocket hub where it seals by the chain tightener . he has a press to take the hub off but i need to know if these are sold or if you have to get a new axle. or if anyone has a old axle, that may be bent or whatever. we are making a trip to hatfield mccoy and need to get this fixed. thanks tyler

[matt14c]

I think lonestar is sells the sprocket hub. Your best bet would be to find a cheap stock axle and press the hub off and put it on yours.

[buck440]

lonestar, durablue, gforce ect... sprocket hubs fit their own axles not stock ones. i went through the same problem and just ended up buying an 06 one for like 115 and looked new and no matter how hard you look for a stock sprocket hub it just isn't going to happen.

[spearman_929]

yeah but the price of a new hub from iron pony in ohio is 109 so if i cant find a bent axle for cheaper than that, thats the way he will have to go. thanks for the info on the aftermarket not fitting the stock

[buck440]

if somehow you find one bent or bad splines and a good hub don't forget to take out the c clip on the outside part of the hub, you ca barely see it.