gt thunder rebuild and airbox

[moshachusetts]

if it get my stock rear resprung and revalve by gt thunder with xc linkage will i need to do anything like raise the air box or space out the exhaust? also with the linkage will my ricochett skidplate still fit?

thanks

you might or might not need to move them...my first 400ex did not need either moved until i let a friend ride it....i weigh about 160 and he weighs roughly 300...he hit about 10 jumps or so with it and the airbox cracked. my 450r was fine without any mods and my current 400ex has some marking on the exhuast.

the skid plate will need cut out, or spaced down...i could not space my armadillo down far enough on my 1st 400ex. the prm i had on my 450r came pre-cut from prm for the aftermarket linkage...and my current 400ex has a cut prm also

but these linkages are thick and tough...they can take a beating...

[moshachusetts]

thanks!

not a problem