john willhoite
08-11-2009, 09:42 AM
Johnny Hales 08 race bike
Raced in the TQRA series
2008 TRX450R
LSR
Gusseted frame
DC4 a-arms
swingarm
axle
bearing carrier
anti-fade
steering stem and clamp
seat latch
DC6 linkage
Race Tech
HI Low comp adj and rebound front and rear I just serviced them with new seals and valving before Oak Hill
Sparks
15:1 piston
43mm carb
air filter and ring
Sparks race cam
pipe
Hardened trans gears
JH
ported head ti intake valves w/ +1 ex valves
Hinson
clutch basket
inner basket & pressure plate
clutch cover
NEW----Just put a new Rekluse pro clutch in 1 race on it
Still have all the Hinson stuff that goes in it.
Maxxis Razorcross front tires
Maxxis Yellow label rear tires
Quad Tech
Low Pro hood black
MC cover carbon
seat cover and foam
AC
front bumper
nerfs
IMS
Foot pegs
Other misc the bike has all Works Connection parts, CV4 red hoses,Carbon Fiber heat sheild for carb. Tag bars, Streamline rear rotor Polished subframe,caliper bracket, Chrome upper a-arms,motor mounts, steering stem everything is PCed black
Hour meter says around 13 since the bike was built only thing that had any time on it before that was the frame before gusset ,cases, and brakes have about 15 hours on them. The piston and Cylinder were replace when the meter said 10.6
$9,200.00
I will get an updated hour reading i think it is at 20hrs.
Still perfect I raced it in 3 races and practiced at Valley moto.
I have to get something with electric start. (i am to out of shape to kick it if I stall it on the track)
So I will consider trades.
Thanks
John Willhoite
405-401-1503
_________________________
check out our blog www.w6racing.blogspot.com
Raced in the TQRA series
2008 TRX450R
LSR
Gusseted frame
DC4 a-arms
swingarm
axle
bearing carrier
anti-fade
steering stem and clamp
seat latch
DC6 linkage
Race Tech
HI Low comp adj and rebound front and rear I just serviced them with new seals and valving before Oak Hill
Sparks
15:1 piston
43mm carb
air filter and ring
Sparks race cam
pipe
Hardened trans gears
JH
ported head ti intake valves w/ +1 ex valves
Hinson
clutch basket
inner basket & pressure plate
clutch cover
NEW----Just put a new Rekluse pro clutch in 1 race on it
Still have all the Hinson stuff that goes in it.
Maxxis Razorcross front tires
Maxxis Yellow label rear tires
Quad Tech
Low Pro hood black
MC cover carbon
seat cover and foam
AC
front bumper
nerfs
IMS
Foot pegs
Other misc the bike has all Works Connection parts, CV4 red hoses,Carbon Fiber heat sheild for carb. Tag bars, Streamline rear rotor Polished subframe,caliper bracket, Chrome upper a-arms,motor mounts, steering stem everything is PCed black
Hour meter says around 13 since the bike was built only thing that had any time on it before that was the frame before gusset ,cases, and brakes have about 15 hours on them. The piston and Cylinder were replace when the meter said 10.6
$9,200.00
I will get an updated hour reading i think it is at 20hrs.
Still perfect I raced it in 3 races and practiced at Valley moto.
I have to get something with electric start. (i am to out of shape to kick it if I stall it on the track)
So I will consider trades.
Thanks
John Willhoite
405-401-1503
_________________________
check out our blog www.w6racing.blogspot.com