PDA

View Full Version : another a-arm ques-new to the 250x's


sameltoe
08-08-2009, 01:02 PM
quik question. . .i was thinking about 400ex arms for my sons quad. question is if you use long travel arms and stock 450r shocks do you need the shock relocator bracket? thought i read somewere that the geom is right. . .but only seen one reply on this and was wondering if this is right. thanks for any input
born2ride14
08-08-2009, 04:48 PM
If you buy 400EX LT a arms then you will want a 16.25- 16.75 inch shock no relocater needed
m0t0xk1d
08-08-2009, 05:08 PM
but if you get the relocator then you can get (depending on the brand of a arms) like 18in to 19 in shock and get massive amounts of travel
sameltoe
08-08-2009, 06:01 PM
awsome!! thank you guys! great site by the way,lots of info here for sure. Can't wait for the winter build! gona put my 05 450r swinger on it.
m0t0xk1d
08-08-2009, 06:47 PM
o that will be good. with that if you plan with going with a no link swinger then you have to put a 250r length shock on it
sameltoe
08-08-2009, 11:11 PM
Originally posted by m0t0xk1d
o that will be good. with that if you plan with going with a no link swinger then you have to put a 250r length shock on it 450r is a link swinger,gona use what i have,what about a 450r rear custom axis with remote rezzy? or should i just ask how long eye to eye is a 250r rear shock? i figured set the ride height and weld tabs for the link