shock

[buda5bear]

w h at is a good shock adjustment for mx front top to bottom backtop to bottom 08kfx450r

[gcart2]

huh?

[631kfx400]

i think hes trying to say for compression and rebound front and rear idk

[usp4u]

let me try guys, I speak jibberish....
theansw er is wh atever worksbestforyou u'll h ave to xperamint.

[TRXman86]

If you mean how can you get more travel, then you need longer shocks and a different set of arms, if your looking for a smoother ride, set your rear ride height around 6" from the frame under the foot peg, measure 20" forward from that mark, and set the front anywhere from 1" to 2" higher. If that does not feel right, adjust accordingly and EVENLY from front to rear. If you put 2 turns IN the front, put 2 turns IN the rear. Keep it even. A little bit of frame slide(bottoming) is fine, just not excessive or every jump. If that is the case, then you need to stiffen your compression accordingly. Do not go more then 1/2 turns in or out. Keep everything wrote down so you know where you started at. o yea... PRACTICE SOME GRAMMAR MORE THEN WRITING PLEASE!!!!