bad450r08
08-06-2009, 10:36 PM
Ok it all started when my bike wouldnt start. I new it had to be the valves so i took it to a machine shop and my valves came to like a point almost so i had them put now ones in. I put it all together and it wont start and i am only getting 8 pounds of compression. I took it to the machine shop and my timing was off so they fixed it and then i had 44 pounds. i put it all back together and it still wont start so i spray some starter fluid in the air box and it will start up but cuts off immedatelly. Does anyone now what could be wrong?