how can I put lights on my honda trx90?

[snobmxman101]

hi how can i put lights on a honda trx90?

[miniquaddad90]

You would have to buy the stator kit from Rick Stator, a tad on the exspensive side but it's the only kit I know of

[snobmxman101]

Originally posted by miniquaddad90
You would have to buy the stator kit from Rick Stator, a tad on the exspensive side but it's the only kit I know of
thanks

[joker11]

I bought the Ricky Stator kit for my son's 2007 TRX90EX.
It is a great kit for what it's designed for. I bought the stator and the light kit. You get the stator, the new regulator, the lights, light covers,the mounting bracket, and the on/off switch.
Here are a few pointers for you.
I had to buy a whole new case cover and a new ricky stator because the directions don't say to use loctite. Well, I didn't. Guess what? It was about 2 weeks of riding and the stator came loose and just chewed everything up.
I called Ricky Stator and inquired. They said Honda doesn't use it so we don't use it. BS!!! USE IT. If you don't, guess where their next sale will come from? YOU!

The stator is only good enough for 2 lights and not bright ones. You will get about 40watts of lighting out of that new stator. Which is 20watts for each light. That's not much.

Go to Walmart and buy the same style lights for 20bucks. The RickyStator ones are REALLY nice. Aluminum housing. The bulb retainers are a beeeetch to remove out in the dirt. I didn't care for that. But it's the same cheap bulb.
OR, mount a single bulb light with a 40watt bulb. Like a stock ATV. Your choice.

The kit comes with a mounting bracket that works. No doubt. But it is so low that the light doesn't get out far enough. Make your own bracket and move it up by the handlebars like a regular ATV light.

The switch is EASY to accidentally turn on and off. If you have the lens covers on, you will melt them. So get a toggle switch and put it somewhere where a kid won't click it on by mistake. Put an LED on the dash as an indicator light.

The instructions are ok. Not very detailed. But it's not rocket science either. My problem is that there were wires in the same location as the new regulator connected, that had the same style connector. Be careful that you get the right wires. It will save you a LOT of time trying to figure out where you went wrong. That was MY bad. My son thought I was an idiot for two days.

Hope someone finds this information useful.

[jb617]

i have a 2009 and i put 2 vision led lights on front works great stock stator there is no draw

[joker11]

jb617,
By golly, you have somehow figured out how to defy the laws of physics!
So you have LED's that somehow illuminate without drawing voltage, amperage and have no resistance? You must, because how else would you avoid OHM's law?
I need to get a set of those crazy lights! I mean, why stop at just two? I want a whole lightbar full of them!

I truly jest.

[jb617]

you are a fn idiot i said there is no draw meaning you can run stock stator not that there is 0 draw.

[jb617]

i used 2 of these with stock stator and trust me they are bright. Hope this helps with out the smart *** comments.

http://www.visionxoffroad.com/led/s1100/



Vision X Off Road > LED > S1100

Solstice Solo S4100 2" Square Light




The all new Solo s1100 in the Solstice Series of LED off road lamps. Equipped with Vision’s brand new 10 watt LED technology, with each 10 watt Solo producing 900 lumens making them the brightest LED off road lamp on the market in only a 2” x 2” square housing. Not only are they the brightest, they are the most efficient with the s1100 drawing only 0.75 amps due to their advanced electronic drivers which are also responsible for their 50,000 hour life span and variable 9 - 50 Volt DC input. The Solstice Solo’s main feature is the 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod or other various available mounting hardware for flat, tube or even helmet mount making it the only modular light with the ability to make any shape or length with the available spot, euro and flood beam patterns mixed throughout your custom configuration. No power on your ride, no worries; Vision X will also be releasing a line of rechargeable battery packs for any configuration of your Solstice Solo light pods.



Key features are as follows; rugged die-cast aluminum housing provides optimum durability and heat dissipation. The Solstice Solo series features an IP68 ingress protection rated housing making them impenetrable to dust and submersible under water up to 3 meters. The unbreakable polycarbonate lenses are housed by a 6061 aluminum face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. The Solstice Solo series has been subjected to a 14Grms vibration test to ensure their performance in high impact conditions. Built to last, this Vision X series features a lifetime warranty.



Solstice Series XIL-S1100: Euro XIL-S1101: Flood XIL-S1102: Spot S1100 Series


Pictures & Video
Inter-Connecting
10 Watt LEDs

Build Your Own Light
800 Lumens Each


Die-Cast Aluminum
IP 68 Rated Housing

Rugged 6061 Aluminum
Dust \ Water Resistant

Series Highlights

> NEW 10 Watt LED Technology

> Equivalent to Several Halogen Lights

> Easy 2 Wire Installation

> Free Voltage 9 - 50 Volt DC Input

> Designed to inter-lock with other S1100 Pods



Model Details

> XIL-S1100

> XIL-S1101

> XIL-S1102


Technology Comparison

Solstice LED XMITTER LED HID Tungsten Halogen Standard Halogen
Total Lumens 900 Lumens5 5760 Lumens3 3500 Lumens 1800 Lumens 1200 Lumens
Light Output Per Watt (Lumens) 1 90 Lumens 60 Lumens 100 Lumens 18 Lumens 12 Lumens
Light Output Per Amp (Lumens) 1 1200 Lumens 720 Lumens 1200 Lumens 216 Lumens 144 Lumens
Total Watts 10 Watts 90 Watts 35 Watts 100 Watts 100 Watts
Start Up Amp Draw 1 .75 Amp 4.8 Amps 4.8 Amps 16.2 Amps 24.3 Amps
Running Amp Draw 1 .75 Amp 4.8 Amps 2.92 Amps 16.2 Amps 24.3 Amps
Operating Cost Per Hour 1,2 $0.01 Per Hour $0.02 Per Hour $0.20 Per Hour $0.52 Per Hour $0.52 Per Hour
Operating Life Span (Hours) 1 50,000 Hours4 50,000 Hours4 2500 Hours4 400 Hours5 250 Hours5
1) LED Source (Edison KLC8) HID Source (D2 35 Watt) Tungsten Source (D2 100 Watt) Halogen Source (H3 100 Watt)
2) Based on a average Vision X MSRP, for Technology Products sold by Vision X using that light source, per light. (Price/Life)
3) Assuming 18" 90 Watt LED Light Bar
4) Life spans are averages of the estimates
5) Halogen bulbs can be replaced at a nominal price
6) Assuming XIL-S6100

Series Comparison

Size Watts Lumens
Xmitter (8") 4" - 52" Available 36 2160
Xmitter Double Stack (8") 4" - 52" Available 72 4320
S1100 2" Square 10 800
S4100 4" Square 40 3200
S6100 6" Round 60 4800
Model Comparison

Beam Pattern
XIL-S1100 Euro
XIL-S1101 Spot
XIL-S1102 Flood

Applications

Universal



Features

> All New Solstice Series Light

> Inter-Locks with Other Solstice Solo Pods To Build a Custom Light

> Free Voltage 9 - 50 Volt DC Input

> 50,000 Hour LED Life Span

> Die-Cast Aluminum Housing

> Inter-Locking Channels Allow Endless Mounting Options

> Easy 2 Wire Install


Specifications

Dimensions 2" x 2" x 2.5"
Weight .5 lbs
Mounting Depth 1"
Amperage Draw .75 @ 12 Volts
Input Voltage 9 - 50 Volts DC
Housing Die-Cast Aluminum
Number of LEDs 10 Watt LED
Housing Black
Lumens 900
Watts 10
Beam Pattern Euro
Warranty Lifetime Limited


2D Drawing


Beam Pattern




Advanced Specifications

UPC:

Type of Light: LED Light Bar

Case Quantity: 4

LED Bulb Type: 10 Watt

Packaged Weight: 1.1 Lbs

Packaging Dimensions:10" x 7.5" x 2.5"

Certifications:

Operating Temperatures:
Includes

Light

Omni-Link
Downloads

Installation Instructions

Accessories

Handle Bar Mount

Helmet Mount

Battery (XPC-B22)

45 Degree Omni-Link

Pistol Grip


http://www.visionxusa.com/led/s1100/index.htm?tab=1#tabbedpanels / http://www.visionxoffroad.com/led/s1100/index.htm?tab=1#tabbedpanels
Applications

Universal



Features

> All New Solstice Series Light

> Inter-Locks with Other Solstice Solo Pods To Build a Custom Light

> Free Voltage 9 - 50 Volt DC Input

> 50,000 Hour LED Life Span

> Die-Cast Aluminum Housing

> Inter-Locking Channels Allow Endless Mounting Options

> Easy 2 Wire Install


Specifications

Dimensions 2" x 2" x 2"
Weight .5 lbs
Mounting Depth 1"
Amperage Draw .75 @ 12 Volts
Input Voltage 9 - 50 Volts DC
Housing Die-Cast Aluminum
Number of LEDs 10 Watt LED
Housing Black
Lumens 900
Watts 10
Beam Pattern Flood
Warranty Lifetime Limited


2D Drawing


Beam Pattern




Advanced Specifications

UPC:

Type of Light: LED Light Bar

Case Quantity: 4

LED Bulb Type: 10 Watt

Packaged Weight: 1.1 Lbs

Packaging Dimensions: 10" x 7.5" x 2.5"

Certifications:

Operating Temperatures:
Includes

Light

Omni-Link
Downloads

Installation Instructions

Accessories

Handle Bar Mount

Helmet Mount

Battery (XPC-B22)

45 Degree Omni-Link

Pistol Grip


http://www.visionxusa.com/led/s1100/index.htm?tab=2#tabbedpanels / http://www.visionxoffroad.com/led/s1100/index.htm?tab=2#tabbedpanels
Applications

Universal



Features

> All New Solstice Series Light

> Inter-Locks with Other Solstice Solo Pods To Build a Custom Light

> Free Voltage 9 - 50 Volt DC Input

> 50,000 Hour LED Life Span

> Die-Cast Aluminum Housing

> Inter-Locking Channels Allow Endless Mounting Options

> Easy 2 Wire Install


Specifications

Dimensions 2" x 2" x 2"
Weight .5 lbs
Mounting Depth 1"
Amperage Draw .75 @ 12 Volts
Input Voltage 9 - 50 Volts DC
Housing Die-Cast Aluminum
Number of LEDs 10 Watt LED
Housing Black
Lumens 900
Watts 10
Beam Pattern Spot
Warranty Lifetime Limited


2D Drawing


Beam Pattern




Advanced Specifications

UPC:

Type of Light: LED Light Bar

Case Quantity: 4

LED Bulb Type: 10 Watt

Packaged Weight: 1.1 Lbs

Packaging Dimensions:10" x 7.5" x 2.5"

Certifications:

Operating Temperatures:
Includes

Light

Omni-Link
Downloads

Installation Instructions

Accessories

Handle Bar Mount

Helmet Mount

Battery (XPC-B22)

45 Degree Omni-Link

Pistol Grip




http://www.visionxusa.com/led/s1100/index.htm?tab=3#tabbedpanels / http://www.visionxoffroad.com/led/s1100/index.htm?tab=3#tabbedpanels

[jb617]

http://s799.photobucket.com/albums/yy278/cvhg2001/

[joker11]

What you wrote and what you meant are two completely different things.
But I am the fn idiot?
Whatever dude.

The lights look good on your bike. Nice choice.
I would like to see them side by side with the ricky stator lights and compare at night.

[jb617]

my friend has the ricky stator set up and only based off of his and no one elses there is no comparison his is really dim and mine is brighter than any stock quad that i have seen plus there mounted off bars so when you move the bars the lights follow with your path. hope this helps.

[JB99]

Originally posted by JB99
looking information on wiring for vison X wiring for TRX90 06