got some parts and jetting questions

[kookennay]

ok so first i getting my other 86 back soon it got stock length rod 68mm bore little porting and fatty pipe and stock head. so were should i start wit on the jetting? ok and now second were can i find a new kick starter mine seems to have play in it like after i start it and push it back against the plastic it just turns right back out. is there any way to fix it. and my shifter is loose i did some grinding were it splits were the bolt goes and i ride it a couple times and it loose again but the bolt is tight. should i just get a new one? thanks for any help!!

[kookennay]

ok i got another question. i got no head light is there a way for me to somehow hook up some driving lights or something?

[Gregjy]

I run driving lights..

[kookennay]

gregjy how do you have them hooked up? do you still have the factory light switch on the handlebars?

[Dubois250r]

You can actualy rebuild the kick starter. Remove the phillips screw and replace the spring.

[RyanWsly]

Go to FMF's website they give you where to start on jetting, go to where ever and get some small lights and mount them, just have to be 12v, mine are similar to the picture on here also, and I just spliced into the factory harness where it used to plug in. Driving lights seem to get busted though, mine get's used like a dozer in the woods sometimes though............I'm lazy, just try to mount them where they are somewhat protected.

[kookennay]

ok i got some driving lights but i dont have the factory switch on the bars. can i just run my own switch or just unplug them when not using them? i rarely ride at night it would just be nice to have something if i do. which wires do i use to run them?

[86 Quad R]

here you are. thanks to kouki

http://www.exriders.com/vbb/attachment.php?s=&postid=3667281

lights (http://www.exriders.com/vbb/attachment.php?s=&postid=3667281)

[kookennay]

that helps alout thanks guys