Parts for sale-prices included DRR90

[mudder700]

Ok,I will take dibs on all of the parts, here is a list of items and prices,all prices are plus shipping
DRR Motor-450.00-Complete with Tranny-air cooled 90cc-ported,fast motor,with coil and CDI box and 28mm OKO Carb
Trinity pipe for DRR90-175.00
2006 Single a-arm DRR Frame-150.00
Rear Axle with hubs and carrier from 2006 DRR90-50.00
A-arms with Spindles and brake cables from 2006 DRR 90-100.00
steering stem-25.00
Rear aluminum wheels with 18X6.5X8 snow hogs-100.00
Front Elkas with remote rezzies 9.5" long eye to eye-250.00
stock front and rear shocks off of a 2008 DRR90-50.00
Front bumper off of a 2008 DRR90-20.00
Handlebars with cross pad and aftermarket grips-15.00
stock 90cc DRR pipe with a shortened silencer, awesome sounding-60.00
another stock pipe, silencer needs to be welded after I cut the tip off-40.00
frame saver w/ composite roller-25.00
Uni filter with outerware for 20 mm carb-10.00
2 belts,good shape,used for testing-10.00
Gas tank-10.00 with cap
Aluminum wheels spacer 4/110-50.00
2008 DRR stock steering stem-25.00
Yellow/black powermadd handguards,like new-20.00
Handlebar pad for Fat Bars-Blue or Red- 10.00 each
Yellow Fox crossbar pad- 10.00
Set of Fat Bars w/ mounts, used 1 race,son flipped quad,thought were bent ordered new ones, and they match up same, will include handlebar pad too-50.00

Still digging up more items, check daily

Any other parts that you can think of on this quad will be sold as well,I think I listed all of them, but who knows.Email me at motoxdad5@stny.rr.com for more info or pics,paypal will be accepted

[qcitytile]

pm sent

[reed19889]

the frame saver is it a ztr frame saver

[edwardsp&b]

is that a stock rear axle? and what shape is the frame in? any gussets, or twists?

[edwardsp&b]

sorry, didnt see that it was a single arm frame.

[mudder700]

Just got done disassembling the entire quad, all parts can be photographed if needed, just let me know

[mudder700]

reduced prices

[outlaw820]

just found your post, need a pipe, could you please send me some pics . The problem is I have a 07 90 aircooled that has a low flow pipe, so I've been told to atleast bump up to a 2009 pipe

[mudder700]

outlaw, the trinity pipe is a big difference over stock, I had it on our 90cc aircooled drr, it made it pull hard

[outlaw820]

thanx for the info, could you please send me some pics of your trinity pipe, outlawfam@gmail.com.

sent pm cleaned out mail box.

[brianjlinke]

how thick and do you still have them

[mudder700]

2.5" per side and yes I do still have them

[camarodean1969]

Will the elka's fit a dual a-arm stock drr90.

[randy81275]

how wide is axle and how much shipped to 32060

[tntauto1127]

I need the left side rear brake controls with the brake hose. You have one? Also what about the wiring harness and starter and handlebar switches?

[mudder700]

sold the brake controls for the rear and the hose and caliper,gave away the switch and starter a couple of months ago on this forum as we no longer needed them,sorry...anything else you need?

[randy81275]

still interested in axle can you tell me the width id like to get you paid for it and get it on the way Thanks Randy 386-209-2680

[fast440]

Do you still have them for sale ? If so how many of them do you have ? Looking for fronts and rears.

[raptorobbie]

does the frame include the single a-arms?

do you have enough parts to make the frame a roller or not?

do you have shock covers? yellow and black?

[mudder700]

Ok, here are some answers in order of asking,32" is the width of the rear axle, I have a set of two wheel spacers, I have the a-arms and the steering stem,I can almost make a roller again, I do have a guy interested in the rear axle though, but I have no rear swingarm,just sold it, and lastly, no I sold the shock and covers

[mudder700]

List has been updated as of 8-13-09, I will be out of town until Tuesday, I will answer all inquiries then. Thanks

Front Elkas still available?

Sent you a PM

[mudder700]

yes, I still have the front Elkas, and I am now back from Maine and ready to do business again, all PM's have been answered

[robinson446]

is the little pipsqueak B for sale? lol

[mudder700]

Naw, we will keep him, need somebody to ride that damn money pit LOL

[yfzracer14]

if u still have the elkas pics to scootware@slic.com

[bradrenea]

What kind of shape are the ners in? Would it be possible to get some pics of the Rath bumper, especially one of the mounting area? Wondering if I could make it work on my son's Eton.

[mudder700]

all the parts are in excellent shape, if you send me your email address, I will send pics of the bumper.

motoxdad5@stny.rr.com

[bradrenea]

bradrenea@att.net

Thanks,
Brad

[mudder700]

nerfs and front bumper sold

[mudder700]

Many new parts added,check daily for updates