PDA

View Full Version : WTT WALSH hybrid for built 450



usp4u
07-30-2009, 10:41 AM
Want to trade for the right KFX,450r,LT-R,YFZ
Will trade for bike+cash
Will sell for $6500obo

-Walsh yz450 Hybrid- Complete Walsh chassis/swinger/arms all Walsh, all original to this chassis. Originally built as a YZ426 for Dave Diver, who later installed a TC YZ450 4spd.

Suspension:
-walsh swinger w/cr500 link
-PEP ZPS small can rear-4 hrs. since Baldwin service
-walsh a-arms
-PEP ZPs small can fronts-same service interval
-walsh steering stem
-PEP steering damper
-LoneStar axle-4 rides on it
-LoneStar rear hubs-NEW
-LoneStar anti-fade brake hub
-HardKor front hubs-wheel bearnings replaced-4 rides ago
Engine:
-Complete TC "National" YZ450 4spd. (If you've never rode on of these engines you have no idea what your missing)
-Complete tear down & freshened up by TC in March
-TC sleeved this engine down to a 440cc back when it was built for this quad due to the old 440max. displacement rule for national competition-A side benefit to that is that this is fastest revving 450 I've ever been on.
-Dry-sump motor with 400EX oil tank
-FMF PowerBomb
-FMF Titanium4 muffler-cut down to about 10"
-Complete Hinson Clutch-basket,hub,pressure plate,plates
-Fluidyne oversize rad
-Boyesen waterpump-this thing has NEVER dumped coolant or ran hot
Controls:
-Renthal Fat-Bar-CR hi
-ASV levers & perchw/hot start
-Pro-Design kill switch
-Honda throttle
-Acerbis handgaurds
Other:
-ITP T-9 Beadlock rear wheels w/inner ring
-ITP T-9 Rolled edge front wheels
-ITP Holeshot MXR6 tires all around 90% tread
-AC Pro-peg nerfs-(left nerf/peg is bent down a 1/8")
-Stainless brake lines


I can post pics tomorrow.
I will trade for a nice, built, production 450 of similar quality. If I dont find the trade I want I will keep and ride this hybrid,it's a ton of fun to ride.
I WILL NOT TRADE for your 400ex,LTZ, car,truck, rocking chair, car audio, etc.

Lynch01ex
07-30-2009, 08:34 PM
Please pics to kinney@lcom.net How much do you want for it out right?
Thanks

usp4u
07-31-2009, 05:30 AM
here are pics, soory, it's a bit dusty.
pics dont do the candy blue frame justice at all
will sell for 7000obo
http://i152.photobucket.com/albums/s162/usp4u/quad001.jpg
http://i152.photobucket.com/albums/s162/usp4u/quad002.jpg
http://i152.photobucket.com/albums/s162/usp4u/quad003.jpg
http://i152.photobucket.com/albums/s162/usp4u/quad004.jpg http://i152.photobucket.com/albums/s162/usp4u/quad005.jpg http://i152.photobucket.com/albums/s162/usp4u/quad006.jpg http://i152.photobucket.com/albums/s162/usp4u/quad007.jpg http://i152.photobucket.com/albums/s162/usp4u/quad008.jpg http://i152.photobucket.com/albums/s162/usp4u/quad009.jpg http://i152.photobucket.com/albums/s162/usp4u/quad010.jpg

JR3
07-31-2009, 09:18 AM
email sent dude

usp4u
07-31-2009, 09:57 AM
e-mailed ya back

800screws
08-02-2009, 06:12 PM
interested in doing a deal for this?

http://www.exriders.com/vbb/showthread.php?s=&threadid=391980

usp4u
08-03-2009, 05:45 AM
800screws, gonna pass on the LT. pretty cool machine, though.
thanks.

800screws
08-03-2009, 03:25 PM
pm'd u...

usp4u
08-04-2009, 12:53 PM
shoot me some offers folks

MyHonSmokeUrYam
08-06-2009, 07:04 PM
i got a 2006 470er..... not even an hour on rebuild curtis sparks big core exhaust stage 2 cam elkas dc4 front end rpm axle stock swing arm, 2008 white oem plastics blingstar nerfs and bunch of misc. you keep your tires and wheels i keep mine

Flyin_250r
08-06-2009, 08:20 PM
Man thats a sick hybrid

usp4u
08-07-2009, 07:31 AM
Originally posted by MyHonSmokeUrYam
i got a 2006 470er..... not even an hour on rebuild curtis sparks big core exhaust stage 2 cam elkas dc4 front end rpm axle stock swing arm, 2008 white oem plastics blingstar nerfs and bunch of misc. you keep your tires and wheels i keep mine
gonna pass for now, looking for kfx or lt-r primarily. Thanks for the intrest.

woodsracer144
08-09-2009, 09:23 PM
just want to give a bump for a sweet quad... along with a Q?

on the font end shot... is there a reason why the lower a-arm tube is visiable I.E. a lower bend right there, lower mount on that spot or is it just from the angle?

usp4u
08-10-2009, 05:36 AM
Originally posted by woodsracer144
just want to give a bump for a sweet quad... along with a Q?

on the font end shot... is there a reason why the lower a-arm tube is visiable I.E. a lower bend right there, lower mount on that spot or is it just from the angle?
Thats how they are are made. Walsh Longbody's. The lower arms have a brace the runs from the ball joints under the shock and ties into a cross-brace that runs between the front and rear tubes. Pretty much everything on this quad is over-built.

woodsracer144
08-10-2009, 09:18 AM
how long are the front shocks?

usp4u
08-10-2009, 09:41 AM
If I remember correctly, 18.5"
I should've taken a pic of the upper shock mounts. If you've never seen it on a Walsh, it's pretty cool...The shocks bolt to a bracket that has a 1/2" stud on the top. That stud goes into a sleeve that acts as the upper shock mounts. You can then adjust the front ride heigth without having to screw with the springs. Pretty slick.

usp4u
08-12-2009, 09:34 AM
$6500 obo

usp4u
08-17-2009, 10:55 AM
BUMP

MyHonSmokeUrYam
08-17-2009, 11:20 AM
you about my 470er with just a front end well i also have a 05 with full gibon axis long travel / LSR axis long travel built bike id be willing to trade if you decide you want another honda

MyHonSmokeUrYam
08-18-2009, 01:04 PM
know you want to bump

usp4u
08-18-2009, 01:24 PM
LOL, maybe next time. I really want an LTR or KFX

MyHonSmokeUrYam
08-18-2009, 07:06 PM
well when u want my stroker 470 with supsension and only an hour on the engine come to me before oct 13th

5pennys
08-19-2009, 04:41 PM
Sent you a pm

Thanks

5pennys
08-23-2009, 08:30 PM
Do you still have the hybrid?

If you are interested in my offer I sent you, then I'm definatly still wanting to work something out with you. It looks like I'll be heading that direction this weekend for another deal so I could probably drive a little further to meet up with you if we can reach an agreement.

Thanks.

5pennys
08-25-2009, 10:55 AM
Sent you another pm.

usp4u
08-31-2009, 06:46 PM
:D

usp4u
09-09-2009, 05:02 PM
will entertain any realistic offers

usp4u
09-14-2009, 10:16 AM
http://i152.photobucket.com/albums/s162/usp4u/QUAD13002.jpg http://i152.photobucket.com/albums/s162/usp4u/QUAD13003.jpg http://i152.photobucket.com/albums/s162/usp4u/quad12001.jpg http://i152.photobucket.com/albums/s162/usp4u/quad12002.jpg http://i152.photobucket.com/albums/s162/usp4u/quad12003.jpg

jason450
09-19-2009, 03:30 PM
PM'd you

usp4u
09-24-2009, 05:50 AM
will trade for nice bike or utility+cash

usp4u
10-01-2009, 11:52 AM
bump
trades: built 450, bike+cash, utility+cash

MyHonSmokeUrYam
10-01-2009, 12:21 PM
i will trade for my 470er hipers all the way rpm axle lonestar elka front end 08 white honda oem plastics its an 06 bike stage 2 hot cam 3mm stroker crank with stock piston and head brand new form honda with paper work to prove it blingstar nerfs and you know the misc. items that all bikes have if any interest let me know i leave in 2 weeks for the CG and i think im willing to trade but only straight up if interested PM me again we can arrange something

http://i103.photobucket.com/albums/m122/feedthafire/Picture389.jpg

usp4u
10-02-2009, 09:45 PM
sorry man, gonna pass. not much of a honda man myself. maybe next time, just doesnt trip my trigger.

gofast14
10-03-2009, 08:54 AM
Whats the CASH$$ price to come get it, this weekend no B/S???

usp4u
10-03-2009, 09:27 AM
you have a pm

usp4u
10-17-2009, 12:43 PM
MAKE OFFER

usp4u
10-19-2009, 07:15 PM
walsh302....trying to resond to you, but youre box is full

motomadnesam
10-24-2009, 05:01 AM
Would you be interested in something like this...

motomadnesam
10-24-2009, 05:02 AM
...

usp4u
10-24-2009, 08:16 AM
sorry, gonna pass on the 'dale.

walsh302
10-24-2009, 10:33 AM
trade you for my honda i got newer pics its just like my ltr might throw in some cash

usp4u
10-24-2009, 03:20 PM
Originally posted by walsh302
trade you for my honda i got newer pics its just like my ltr might throw in some cash
send some pics nkmiller@randyandbobs.com, include a parts list and how much $$ youre thinking. not much of a TRX fan though.

hondaracerkid00
10-29-2009, 12:28 PM
sold to me ! sorry guys

Flyin_250r
10-29-2009, 10:43 PM
nice job picking that hybrid up. I was shocked it didnt sell sooner.

i personally love the yz450 engine... enjoy it man, thats a sick quad!

usp4u
10-30-2009, 07:25 PM
Originally posted by Flyin_250r
nice job picking that hybrid up. I was shocked it didnt sell sooner.

i personally love the yz450 engine... enjoy it man, thats a sick quad!

LOL, I was the one that was shocked! "hondaracerkid" is a good guy, and I think he knows he is getting the better end of the deal....I'm REALLY gonna miss this quad. REALLY gonna miss it.


Let this be public record: hondaracerkid: if you ever get rid of thid quad, I want first chance to get it back!!!!!!!!!