valves

[jelrod05]

what are som good feller guages to buy and where to get them

[honda400ex2003]

i think you can get them from rocky in the right size and such or you can go to the auto parts store and buy a whole set of longer ones. by longer i mean a couple of inches. that way you can get down inside of the valves to feel for the right gap. i will look right now on magic and see if i can find them. steve

[honda400ex2003]

heres some,

http://www.magicracing.com/Motion-Pro-Tappet-Feeler-Gauges_p_4124.html

i know they work good too, but i like to have the whole set in case i need them for anything else. these are great if you only have to check the 400 with them. just make sure you get the right sizes and you are set. I think you need the .005 and the .006 for the stock cam(not sure exactly off hand) along with any hotcam that is put in. steve