Smith Roll offs Questions?

[400exBro]

I purchused a pair of smith warp roll off googles, and i tested them out this weekend, but did need to use a strip (didn't have to pull a tear off) and when i got home it looked like to was gone so i went to pull the knob on the rope and it wouldn't move... it was like the sheet of film like froze on or is stuck on... did i put it in wrong????

i need some help here ....

also what things should i do to take care of them so they don't break or get ruined???
thanks

[toby400ex]

i dunno about how to fix your prob but i got the black and chrome smith warpstar roll offs and i lovem.

[Wingnut]

What I did with mine is I put some fishing line behind the film. It helps keep the film from touching the lense. You have to notch the edges of the lense (I used a hack saw) about 1/8 of an inch deep. Cut the line to the length you need and knot both ends. You want the knots to be just a little too short so that the lense will bend forward. Then when you bend the lense back the fishing line will be very tight. I also use one of the visors that over laps the top of the film and keeps water out. I have never had any dirt or water get behind the film with this setup.

[gncc400exxx]

Don't was them in the washer. I can wash my oakleys all day long in a laundry bag in the washer and they are fine ,but i washed my smiths one time and the foam fell apart.

[tants]

i never wash my goggles. i run them off with warm water. how much were the roll offs? do you think there worth it??

[400exBro]

ooooo they are worth it, i hate getting roosted in the holeshot and then can't see for the rest of the race.... the seem to work if everone is running them...


is there any other methods, i tired it again today when i was riding and it seem to work becuase the googles were srecthed back? any other suggestion?

thanks

[quadman22]

i know exactly what is wrong. i just got those and that has happened to me. ya know the bar that the lens raps around? the top of it popped out, no biggy just unsnap the cover and put it back in place. is this confusing or do u know what i mean?

[OutlawEX]

I was gonna get roll offs until a guy from my shop had a pair jam on him in a hairscramble..Hope you guys have better luck

[400exBro]

ya i know what you mean, but how exactly does it pop into place.... the top wonèt go it to the groves, but i don t think it should, could you show me a pic of where you put your axle thing


thanks

[465Stroker]

If you have the 2003 Warp goggles you will need the film with a WHITE axle in it. If you are trying to use the BLACK axle film it will not work. The BLACK will for for all 2002's and older. I think this is what your problem is.

I just recently started using roll offs within the last 3 months and I think there awesome..

[Bart]

Does anyone know if the WHITE axle film will work in older (2002) goggles?

[465Stroker]

NO, they are no interchangible.

[OCCRA288]

Can I add Rolloffs to my Smith Warp Goggles???

[Wingnut]

Originally posted by OCCRA288
Can I add Rolloffs to my Smith Warp Goggles???

Yes, I had had my goggles for over two years before I bought the Roll Offs kit. Anywhere that sells the goggles should be able to get the kit for you.

[DGR Designs]

awesome. i just bought some warps. but there not roll off's. im gona buy the kit
~Dave

[400exBro]

yes both axles are white.....

did i install them wrong way???

it didn't come with instruction becuase some one open the package so there were none in there... so i guessed, also i got 10% off just because some one open them, nothing is wrong with them...


thanks