Push-Pull fan setup?

[Blizzard24]

Just wondering if anyone has done this, I have heard the Warnert team is running this but not sure how to wire it, what push fan to use and how it is working out?

[ScottB125]

YOu could probably run a trans cooler fan from Summit. The only thing that might be an issue would be the amp draw on the system. I wouldn't get anything too big.

Wiring it up, I'd use a relay and either wire it on a switch or some even come with thermostats. You'd have to tap in somewhere, but would make a nice setup.

[kellymi]

I am interested in doing this also. what I would like to see is a picture of how it is mounted up.

[BSTURDIVANT]

Use another stock fan mounted low down in front of radiator- just have to switch wires to make a pusher fan! R to B and B to R
Tabs will need to be welded to the radiator sides to mount the fan.

[Blizzard24]

thanks Brent!

[BCS Performance]

We have an aftermarket fan set-up that we put on our radiator system. You can send your radiator in and we will weld the new mounts on and install the larger fan. This fan is 3" larger than the stock on and poulls much more air.

Give us a call with any questions you may have.
413-736-2201

[atvlover]

Motoworks has a bracket which will allow you to run a stock fan in the front. In fact the setup comes with a fan and the wiring.

[comander420]

Anyone got some prices on these setups the BCS and the motoworks?