What Do you Guys think of my new national 250x ?

[born2ride14]

I bought it not running with a bent valve for $2000! It has a fully built tc racing motor, jb a arms, elkas, lonestar rear 250r swing arm, lonestar rear axle, custom antivibe steering stem, fullbore plastics,almost a whole nother motor minus cases and piston, It even has a bolt on rear linkage mount. The bike was put together for # 88 mat bartosek SP?

Also what would you guys pay for a bolt on linkage mount for a 250r swingarm?

So anyways $500 later i had it running and i also bought a few goodies, like a asv lever for $20 shipped

What bumper should i go with, it had an AC racing one but i put it on my 300ex because it flows better with the plastics?

When i brought it home
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x004.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x003.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x002.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x001.jpg


AFTER I GOT IT DONE
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x013.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x011.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x010.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x009-1.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x008-1.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x005-1.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x004-1.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x003-1.jpg
http://i195.photobucket.com/albums/z190/born2ride4/250x/250x002-1.jpg


Now

http://i195.photobucket.com/albums/z190/born2ride4/BothQUADSandsomepowdercoat002.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x/BothQUADSandsomepowdercoat003.jpg

[85spraybomb]

looks sick dude,i love the way that thing looks.
i remember seeing pics of it on here before,and i wished i could've had that nice of a quad.

[IRISH-RACER-14]

dont u have that with a while?i think u should get a bumper like the one in this pic

[born2ride14]

What doeseverybody else think?

[300ex#996]

i personally like the rath racing one, but mine is powdercoated black so it looks sicker :devil:

[Tommy Warren]

I think you should cut the front plastics and throw a proarmour on there.

[400exrider26400]

Originally posted by 300maniac
I bought it not running with a bent valve for $2000! It has a fully built tc racing motor, jb a arms, elkas, lonestar rear 250r swing arm, lonestar rear axle, custom antivibe steering stem, fullbore plastics,almost a whole nother motor minus cases and piston, It even has a bolt on rear linkage mount. The bike was put together for # 88 mat bartosek SP?

Also what would you guys pay for a bolt on linkage mount for a 250r swingarm?

So anyways $500 later i had it running and i also bought a few goodies, like a asv lever for $20 shipped

What bumper should i go with, it had an AC racing one but i put it on my 300ex because it flows better with the plastics?

http://i195.photobucket.com/albums/z190/born2ride4/250x001-1.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x002-1.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x003-1.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x004-1.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x005-1.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x006-1.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x007-1.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x008-1.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x009-1.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x010.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x011.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x012.jpg

http://i195.photobucket.com/albums/z190/born2ride4/250x013.jpg


where did you get that supertrapp exhaust ?

[born2ride14]

TC RACING

[Dansc90]

I would give anything to have one of Matt Bartoseks old bikes. He's my hero. Your a luck man.

[QuadCobbler]

Can you post some pipcs of the bolt on linkage mount? and what is the offset on your front wheels? thanks

[born2ride14]

Originally posted by QuadCobbler
Can you post some pipcs of the bolt on linkage mount? and what is the offset on your front wheels? thanks

The front wheels are 3-2 but its at my buddys shop getin a new aluminum tank made so i cant take a picture of the linkage mount, but look at my video on you tube

250X WALK AROUND

[IRISH-RACER-14]

i think u should get a plastic tank on ebay? its gona be lighter?

[born2ride14]

i am not worried about weight, plus the aluminum tank is goint to be cheaper than a plastic one

[IRISH-RACER-14]

ok man its ur quad

[85spraybomb]

yo jesse,clean out your message box,sent the money order for the a arms this morning.
Thanks again
-Kenny

[born2ride14]

Originally posted by 85spraybomb
yo jesse,clean out your message box,sent the money order for the a arms this morning.
Thanks again
-Kenny

yo man just cleaned it!

[Dave16]

I saw some of your vids your quad is pretty awesome did you actually rebuild the motor yourself?

[born2ride14]

beleive it or not i did, i hate the all the haters that commented but, i dont think they can say "when i was 13 i rebuilt a head my self"

[IRISH-RACER-14]

i built a 2 stroke motor, just the head, its easy if u follow the instructions

[woodsracer144]

is there a mount welded on the bottom of that chassis? post a pic of how that works... thanks

[born2ride14]

No its not welded on its like a clamp o nlinkage.

I updated the original post go look at it.

I need to get some pictures of it i keep on forgetting

Here is the walkaround video

<object width="660" height="525"><param name="movie" value="http://www.youtube.com/v/hz0m34j_36c&hl=en&fs=1&rel=0&color1=0x006699&color2=0x54abd6&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/hz0m34j_36c&hl=en&fs=1&rel=0&color1=0x006699&color2=0x54abd6&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="660" height="525"></embed></object>

[Cmh156]

Awsome!!!!

Im trying to get mine to be ready to race mx,but i gotta do a lot of work over winter for my rebuild.

Do you know the classes and ****? Ive never raced so im new to it,but i can jump a quad and catch on easy so it will work out.

[born2ride14]

Depending on your riding ability and age, you could be racing in the youth class but if you are like crazy fast you could be in the c class

[Cmh156]

Than im guessing c class,because im 17.

Here i come an empty wallet once i get a job,and a bad *** quad.

[woodsracer144]

well im sorry my 13 year old friend...the bolt on and not welded on... what about it running? or you ridin?

how is that production? with that rear end? or dont it matter with those quads?

[born2ride14]

I wast being snotty

Yes i even though it is not a prodution swing arm i can still run it. as long as it has production case and production frame it can be ran in the nationals

[woodsracer144]

ok i'm gona toss ya a good one!

then if you have a production mounts why dont people make mounting spots on the oem chassi to make them CR500 links, or a narrow frame and change the OEM shock mounts?

if i under the stood the rules right all chassis mounts had to be with in OEM places... meaning the 300ex didnt have link so i didnt think you would be able to run one...

[m0t0xk1d]

you can pretty much do any mod you wont as long as it is BOLT ON. meaning anything is legal as long as nothin is welded. also NO hybrids

[woodsracer144]

so you need stock cases... can the be bored or things altered on the oem cases? use yfzr cases and make a fi 2 stroke? this is what tehy did with the first 4 stroke pit bikes there was a guy that use a Cr 85 and make a 150 4 poke out it... it was crazy