PDA

View Full Version : Please help me with my ex



RNL
07-26-2009, 03:04 PM
Today I pulled my plug on the ex I bought used about 3 weeks ago. It has always ran ok the 3 times I've rode it, except it was hard starting quad, and sometimes cuts out while idling. Well the plug is whit. I am no expert, but I know that means it's running lean. The quad is all stock except for a Twin Air Filter. Can I get some advice on what would be the best route on fixing my problem. I am a newbie to quad wrenching, so any advice or help would be greatly appreciated, thanks.

rob_990
07-26-2009, 05:44 PM
rejet?

Snipe
07-26-2009, 06:00 PM
Thats really all you can do is rejet to a bigger size. If the tip is white where is firing off of.

timmersam
07-26-2009, 08:08 PM
If its white its definately lean, and getting it jetted properly is very important. As for the hard starting, a bigger jet will help with that, but your valves could be too tight as well (less likely).

Sam

nakomis0
07-26-2009, 08:11 PM
A basic question but... You do have filter oil on that filter right?

RNL
07-27-2009, 06:30 PM
yes it has filter oil on it.

heideman33ex
07-28-2009, 08:42 PM
I just purchased a new Velocity air filter (not yet installed), would that need filter oil on it as well?

turbo j
07-28-2009, 08:46 PM
That will take a K&N type filter oil from any auto parts store.