wallowed out wheel question

[snacob14]

I was out riding at st. joe today and lost two of my lug nuts on my rear tire. I didn't realize it til I was alomst done and it wollowed out three of the holes real bad. is there a way to repair this? they are the itp's. They don't have a replaceable center. Any help would be awesome.

[rooster300ex]

Nope they are pretty much junk now.

[byrdman37876]

Might not get u any where but i would contact ITP and see if they could repair it or replace it.

I dunno :ermm:

[XCRacer236]

nope. happened to one of my buddies. have to replace the wheels. his were ITP's as well.

[pro-rider46]

if you want, you can mark new holes and take the drill press to them. just be sure that the hub is perfectly center in the wheel before you mark where the studs go.

[CRE Performance]

Originally posted by pro-rider46
if you want, you can mark new holes and take the drill press to them. just be sure that the hub is perfectly center in the wheel before you mark where the studs go.

Yep. Did it. Best way I found to do it is go to someone with a brake lathe (automotive) and chuck it up, install the drum turning arm, and center it by the stud holes and turn a line in it. Then you can mark you studs with your hub and know they are centered.

[300ex_#387]

I had my old holes welded shut and had new ones drilled on a mill.