anyone running updated oem crank in 04-05s?

[Tims660rap]

good luck wit it bad luck? anyone have it fail yet? anyone satisfied? my oems gone so i need a crank, hotrods isnt an option currentlty as talked about in my other thread.....thanks guys

[Tims660rap]

when you buy the updated crank p/n 13090-HP1-315 i understand it doesnt come wiht all the parts for the job,....from some1 with experience can you tell me EXACTLY whats missing to do a complete crank overhaul..i dont wanna get parts in and be ready to assemble and be missing stuff...

[pro-rider46]

i run a updated one. been running it since early winter with not a lick of trouble yet.

[Tims660rap]

could you tell em parts you needed to order along with crank itself? i hear it only comes with 1 bearing etc...

[pro-rider46]

idk what all comes with it, my motor was under warranty so i just had cernics do it for me.

[DEERCHOOPER]

you need to get the other main bearing.

[dads400ex]

You need the the left side bearing and seal.

[Tims660rap]

anyone kno the part numbers for left side bearing and seal?

[Tims660rap]

and do i still need the seal if i buy a complete gasket kit with seals and o rings?

[DEERCHOOPER]

everything you need

http://www.xtremeusa.com/fiche_section_detail.asp?section=167789&category=ATVs&make=Honda&year=2005&fveh=3858

[Tims660rap]

could someone point out the numbers for the left side bearing and seal needed in that fiche? thanks

[BSTURDIVANT]

# 25 and # 30 are bearing and seal!-- get Honda gaskets for a good seal! Also would get new oil pump pickup Pt# 15150-hp1-670
Metal is hard to get out of the old one!!

[honda4life72]

that part number dont work

[ltothaj1]

i run the updated oem crank, i just replaced it about 2 months ago on my 05 and honda has updated the part number. At first you had to get the part number for the replacement crank bearing and the part number for the OEM crank, but now honda has updated it and you can just go to any honda dealer and ask for an oem crank for an 04-05 trx and it will come with the bearing you need, or u can go to service honda and give them the original part number for an oem crank or the part number for the replacement bearing and they both come up as the whole crankshaft assembly. All the crankshaft assemblies come with the updated bearing.

I can also tell a big difference in my quad it is much smoother and looser than before. It does not vibrate near as much and compared to now, before i updated the crank something was def. holding my quad back.

the part number is: 13090-HP1-315

service honda is cheapest place i found and where i got mine from, price is 218.38 and was here in 4-5 days

[miles Machine]

not to throw the post off topic but what is #15 on that fiche for?

[pro-rider46]

Originally posted by hondarider11
Do they even sell the old crank anymore? If you get the updated crank will you not have to worry about anymore like everyone worries about the stock one on their 04? I want to build my motor and figured I should get the updated crank while I am at it incase mine is ready to go.

i dont think that they sell them anymore. deffinatly make sure you replace that crank before its to late. i am going to replace the crank in mine probably every winter, or get it rebuilt at least. i plan on stroking it this winter so after that i will probably just get it rebuilt.

[redpowerhrc450r]

I just did a updated crank in my bike 2 weeks ago. I guess they changed the specs on the crank to help them out. i wish i would have gone with a stroker crank now cause it would have been the same price for me to get the stroker one. but i got the oem one. and it did only come with one bearing i had to talk the other one off my crank and use it. so this winter im doing all new bearings on my crank. will post pics of my crank. used 6 cans of brake cleaner to get alll the metal shavings out of my motor.

[Tims660rap]

Yea my updated crank just came in 2 days ago, getting installed over next few days. I ended up paying $228 to my door took about 6 days. Hope this holds up!!!