Allison55ex'er
07-14-2009, 01:57 PM
Today I was messing with my clutch cable because it seems harder to pull then normal and since I have had it it wouldnt take off until the lever was almost all the way out which probably means I need a new clutch. But anyways I loosened the cable up and sprayed some PB blaster down into the cable I would definetly not recomend this cause it seems like it made it worse but my problem is that when I was putting the cable back on and adjusting it I had it too where it had about a 1/4 inch before it engaged and I started it up and shifted into gear and it jumped forward and stalled with the clutch pulled in. so i tightened it up to where there was no slack in the lever started it and same thing. so i tightened it a little more to where it was already engaging a little without pulling the lever just to see what it would do and after starting it and putting it into gear it jumped forward a little bit and then I let the clutch all the way out and it didnt move. I dont understand whats wrong with it I pulled it into the garage changed the oil and now its not working right. I hope someone can help me out before we go riding this weekend