400ex stock parts, a arms, spindles, front brakes, ect.

[78ta]

2003 400ex front end: a-arms, spindles, hubs, brake rotors, and tie-rods. everything in good shape, no stripped holes, no bad joints/bearings or ripped boots. only thing wrong with it is it has some of the paint worn off the a arms. These are off of my personal quad. $220 plus shipping

another set of spindles and hubs, all good except 1 hub could use some new wheel bearings, other than that, no damage. $75 plus shipping

another set of spindles that are pc'd gloss black. 1 is perfect the other has been crossthreaded, the castlenut is junk but the spindle looks like you could save it if you ran a die over the threads. I just don't have the right size die! $25 plus shipping

400ex rear shock, looks good, I never tested it though, may need rebuilt??? It was just in a bunch of parts I bought once and was keeping for a spare or to have sent out and rebuilt/revalved. $35 plus shipping

2003 400ex complete front brake system, perfect! off of my personal quad. no pads or lever. recent fluid chance, still sealed up, might not even have to bleed it! $150 plus shipping

make an offer, I will try to post pics, if not I can email them.

[78ta]

spindle/hubs

[78ta]

pc'd spindles

[78ta]

shock and brakes

[78ta]

rear shock

[78ta]

pc'd spindles

[dirtdawg]

i don't need the rotors and hubs cuz i'm doing a conversion for my 300ex. how much for the a-arms & spindles?

[dirtdawg]

i also need the tie rods.

[78ta]

I don't really want to split up that set just yet, the whole a arm set up is nice, nothing wrong with any of it. I even put new wheel bearings in the hubs about 2 hours of use ago!

[IRISH-RACER-14]

Originally posted by dirtdawg
i also need the tie rods. dirtdawg i think u should get the spindals cause without them ur 300ex wheels will be away off...the top of the wheels will point in 2 much

[dirtdawg]

i already asked for the spindles but he said he doesn't want to split up the hubs, rotors and spindles until he doesn't get any bites on the whole front end together.

[dirtdawg]

would the hubs and rotors work with my 300ex calipers and pads? if so, how much for the whole front end shipped to 02832?

[78ta]

i don't know if 300ex calipers will bolt up or not, but I do have a very nice 400ex front brake set-up also....just a thought. I don't have any sipping quotes yet, I have been sick and don't even have the parts boxed up yet, I will tell you that what ever it cost me is what you pay, I am not trying to make money on shipping

If you are serious about buying I will get you a shipping quote asap.

[dirtdawg]

i found out that it will work, so i am serious about buying it now. whenever you get a chance let me know what the total cost is.

[78ta]

its gonna be $21.33 to ship, I will take $235 for it shipped.

[dirtdawg]

do you do paypal? what is the address?

[78ta]

a arm set up is sold, still have everything else. if interested make offer...don't wait too long or its going on flebay