PDA

View Full Version : carb falling off


oldyeller
06-30-2009, 08:14 AM
24mm keihin carb installed on koso intake and no matter how tight I clamp it, it falls off. There is no receiver groove in the rubber intake boot to fit into the carb. Do I have the wrong intake boot?
06-30-2009, 09:31 AM
Yes you have the 28 to 30 carb boot. you need the 24 intake boot. Good luck Maximum RPm sells them call Justin www.Maximumrpm.com
oldyeller
06-30-2009, 10:30 AM
No, it is the correct size. It just doesn't seem like much to clamp to on the nose of the carb without the raised rubber ring inside the rubber boot.
bmxican345
07-01-2009, 02:18 PM
put wire ties around it
oldyeller
07-15-2009, 07:01 PM
Had the incorrect boot with no ring inside to fit into the groove..New one should solve the problem..
07-15-2009, 09:29 PM
I knew you did oldyeller. Glad to hear you got it fixed.