KingpinsEx
06-29-2009, 08:59 AM
Just curious a few things about "the best setup" for mx tires. First is what tire pressure's have been working best for you guys? I'm sure it gonna depend on what type of surface, soft/hardpack/blue groove. I have heard anywhere from 4.5 to 11, I'm typically running somewhere in between. The less pressure I assume is gonna give you more traction, but I read that this makes your suspension super hard to dial in due to all the tire flex.
Also on the fronts, what seems to be the best size mx tire to go with? I have an LTR and the stock tires are 20x7 R 10. I just put on a set of ITP Holeshot fronts, but they measure 19x6 R10 and I am a little worried since I am running Maxxis Rzr Mx rears. The rears say they are the same size as stock, but due to the deep lugs they are actually like an inch taller. So there is not much difference between the fronts and rears as far as height. So I am going to "try" this setup, but it the 20in front better to go with or not? The shorter fronts should being my center of gravity down but I am going to have to increase my front ride height I think to bring the front end up slightly... Any thoughts?
Also on the fronts, what seems to be the best size mx tire to go with? I have an LTR and the stock tires are 20x7 R 10. I just put on a set of ITP Holeshot fronts, but they measure 19x6 R10 and I am a little worried since I am running Maxxis Rzr Mx rears. The rears say they are the same size as stock, but due to the deep lugs they are actually like an inch taller. So there is not much difference between the fronts and rears as far as height. So I am going to "try" this setup, but it the 20in front better to go with or not? The shorter fronts should being my center of gravity down but I am going to have to increase my front ride height I think to bring the front end up slightly... Any thoughts?