ZRider400
06-28-2009, 07:35 PM
2003 JRD Frame, flip top subframe, a-arms, swingarm, adjustable steering stem, quick release front fender mount, Pro peg Nerf bars, and Grab bar,
Comes with mounts for CRF450, YZF and 250R (some were bought from a diff chassis, but will work on this with slight modifications) I have over 400 dollars in extra motor mounts.
Everything has FRESH POWDERCOAT with 1 ride... Also throwing full chassis skid with it, and JRD aluminum no-link AIRBOX and intake boot!
***$2,100 Shipped!***
axis rear shock $375 shipped
Full bore plastic front and rear , rear plastic was trimmed near exhaust, and has 1 spot where it slightly melted from exhaust heat. These are new with 1 ride. Come with full BVC graphics kit installed. Also comes with all fullbore mounting hardware and NEW oem honda grommets.
**** $375 shipped****
Elka Dune edition front shocks 19 1/4'' to 19.5'' long i believe setup for roll LT front end, with 175 pound rider.
These are new with 1 ride
quad rate, ride height adjust / piggy back rezzys no adjustments.
******$549*****
2003 CRF450 motor Fully built , comes with all electrical , carburetor, spark plug, kill switch, Clutch cable, and throttle cable to work with honda throttle.
Ported by JC racing, New valves/seats, 13.5:1 piston, Hinson clutch, DREAM billet water pump cover. I just rebuilt the water pump also, new shaft/seals/impeller (known to leak)
*******$1650 Shipped******
250R seat, with brand new gripper cover ready to install
****$100 shipped***
250R gas tank $ 50.00 shipped
400ex front spindle/caliper/hub, Brake lines and master cylinder setup ready to go on a 400ex, or trx250r. Great upgrade for 250r. Just installed brand new pads, and wave rotors on these
***$250.00 ***
250r rear durablue axle , this is a older style + 4, dull finish , appears to be straight...works great. *** $ 200 shipped***
250r RPM antifade lock nut, new with 1 ride, some scratches on it
150 shipped or 185 with new wave rotor
250r rear master cylinder/brake guard/pedal and caliper with new pads
***150 shipped***
AC front bumper **45 Shipped**
250r dual row bearing carrier
this is mint
** 95 shipped***
frame or motor must go before i start taking this apart!
Comes with mounts for CRF450, YZF and 250R (some were bought from a diff chassis, but will work on this with slight modifications) I have over 400 dollars in extra motor mounts.
Everything has FRESH POWDERCOAT with 1 ride... Also throwing full chassis skid with it, and JRD aluminum no-link AIRBOX and intake boot!
***$2,100 Shipped!***
axis rear shock $375 shipped
Full bore plastic front and rear , rear plastic was trimmed near exhaust, and has 1 spot where it slightly melted from exhaust heat. These are new with 1 ride. Come with full BVC graphics kit installed. Also comes with all fullbore mounting hardware and NEW oem honda grommets.
**** $375 shipped****
Elka Dune edition front shocks 19 1/4'' to 19.5'' long i believe setup for roll LT front end, with 175 pound rider.
These are new with 1 ride
quad rate, ride height adjust / piggy back rezzys no adjustments.
******$549*****
2003 CRF450 motor Fully built , comes with all electrical , carburetor, spark plug, kill switch, Clutch cable, and throttle cable to work with honda throttle.
Ported by JC racing, New valves/seats, 13.5:1 piston, Hinson clutch, DREAM billet water pump cover. I just rebuilt the water pump also, new shaft/seals/impeller (known to leak)
*******$1650 Shipped******
250R seat, with brand new gripper cover ready to install
****$100 shipped***
250R gas tank $ 50.00 shipped
400ex front spindle/caliper/hub, Brake lines and master cylinder setup ready to go on a 400ex, or trx250r. Great upgrade for 250r. Just installed brand new pads, and wave rotors on these
***$250.00 ***
250r rear durablue axle , this is a older style + 4, dull finish , appears to be straight...works great. *** $ 200 shipped***
250r RPM antifade lock nut, new with 1 ride, some scratches on it
150 shipped or 185 with new wave rotor
250r rear master cylinder/brake guard/pedal and caliper with new pads
***150 shipped***
AC front bumper **45 Shipped**
250r dual row bearing carrier
this is mint
** 95 shipped***
frame or motor must go before i start taking this apart!