Bunches of small parts for sale.... IMS Tank, 38mm A/S, PEPs

[thedeatons]

Hey guys...

I had this stuff listed on 250R.net, but no one was biting for whatever reason. I am now listing it here on the high traffic site!

IMS 3.6 Gallon Tank (Red) - This is the +1 gallon tanks by IMS. $100 shipped

Keihin 38mm AirStriker Carb - Great shape!!!! $100 shipped

OEM 250R Front Brake Master Cylinder/Lever - Decent condition $20 shipped

OEM CRF230 Front Brake Master Cylinder/Lever - Great condition! (For use with a twist throttle only, silver in color, off the new bikes!) $50 shipped VERY LOW PROFILE!!!!

OEM Black Plastic Radiator Shrouds with Plastic Radiator Screen - Good shape, all tabs and holes are still intact! $40 Shipped

OEM 250R Radiator - Complete with cap, NO LEAKS! Came off my running 250R. Good shape, some bent fins of course... $45 shipped

Complete 250R ignition - Includes OEM Honda stator (Suspected bad, may need rebuilding), OEM Honda Coil (Needs new 90 degree boot), OEM CDI, Modified race wiring harness (Super clean! Built it myself using wiring loom, etc), and a BRAND NEW Janssen Coil with custom aluminum bracket!!! $50 shipped

PEP Shocks with Rezzies - Full set for Laeger Narrow ProTrax/CR500 Linkage. These PEPs were Doug Eichner's PEPs, set up by Mark Baldwin. They have "Property D. Eichner" engraved on the bodies. I confirmed with Mark that these are the real deal. They need seals, and a hone run through them. They would make a great project for someone, I just don't have the time. $400 shipped. (Shocks are disassembled, ready for rebuild. This includes ALL shock hardware, billet reservoir mounts, PEP neoprene shock covers, etc).

I may have a few more things... A used Wiseco piston, etc. Pretty cheap for that.

These are all the pictures I have right now, I dropped my camera while taking these pics.... I am a fair seller, and will ship ASAP!!! If you want everything here as a package deal I can give a discount.

http://i709.photobucket.com/albums/ww92/thedeatons/DSC05444Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC05445Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC05446Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC05447Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC05448Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC05449Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC05450Large.jpg

[thedeatons]

Guys... Sorry, I listed the price on the tank incorrectly. It is $75 shipped, just like I listed on the other site. Sorry about that!

[danhung11]

Please send pics of shocks to daniel.k.hung@gmail.com.

What length are the shocks? Adjustability?

Thanks,
Dan

[jabbahoo]

Dan you ride a 250r? What happened to the 450r?

back to subject

[thedeatons]

Pics sent to your email address! Anyone else need any of this stuff?

James

[wilkin250r]

If Dan isn't interested in the shocks, then send pics and specs to wilkin250r@msn.com

[danhung11]

Originally posted by wilkin250r
If Dan isn't interested in the shocks, then send pics and specs to wilkin250r@msn.com

James,

I'll pass on the shocks. Thanks for your time and good luck with the sale.

Thanks,
Dan

[Motofool250r]

pics of shocks to williambrosam@gmail.com

[thedeatons]

Email sent!

[MossboysRacing]

A little off topic, but what did you use to coat the black gas tank thats on your bike??

[Motofool250r]

truck bed liner looks like my fenders on my 295

[thedeatons]

It is bedliner, but it is the good stuff. Line-X. Warrantied for life, and super thick. Cost ~$60.

[Motofool250r]

i have some front race cut fenders in line-x pretty good stuff

[thedeatons]

More info on the PEPs....

They are project shocks, basically you rebuild them, which is why I priced them quite inexpensively.

Measurements are 19" eye to eye for the fronts, and 19.25" eye to eye on the rear.

Pics available upon request. These are sold as a full set guys.... Front & Rear.

[Honda 250r 001]

pics of shocks to hedberg345@hotmail.com

What are they gonna take to be useable? shock oil and seals? or do i need to have the shaft re-chromed. I am super interested, but only if there useable.
Thanks

[thedeatons]

Seals, along with a rechrome of the shock bodies. Anything beyond that I am not sure, just telling you what is visible to me. I am not really a "shock guy", but I can see where chrome is chipping off and the seals needed to be done when I got them. Pics on the way.

James

[Honda 250r 001]

your absolutly sure these have a 1/2 inch shaft?

[thedeatons]

Yep, 1/2" shafts, measured. They are most likely circa 1995, when the frame was built. Once again, they are Doug Eichner's shocks, from when he raced a Laeger.....

I mentioned before that these needed rebuilding. They are not useable right now. They are project shocks. I can't believe they haven't sold for what I listed them for, I assumed they were worth at least that when a set of Axis runs $1400.....

If you guys are looking for a deal, then how about $300 shipped for all three. I need these out of the garage, and definitely need the money.

Start making offers on the rest of the stuff too, it all needs to go and I don't want to just throw it away..... :)

[Honda 250r 001]

bushings all good and does that shaft move inside the shock body?

[thedeatons]

Sending reply via email now.

[Honda 250r 001]

reply sent.

[thedeatons]

Front shocks sold - Money order being sent so payment is pending.

Rear shock is now available by itself for $150 shipped. (Fits a CR500 linkage rear end, came off a 1995 Laeger Narrow ProTrax CR500 Linkage frame).

[thedeatons]

Bump for a few good deals...

Lower price on the PEP Long Travel rear shock (for Laeger frame with CR500 linkage) - $100 shipped!!!!!!!!!

Still need to sell the other stuff.... 38mm carb, tank, radiator, shrouds, handlebars, front brake master cylinders, etc.....

James

[Honda 250r 001]

hey check your email. i got the shocks, you need to reply.

[thedeatons]

Reply sent!

James

[dts54]

Do you still have the Airstriker carb for sale? If so what year is it? Is it stock?
Thanks
Dean

[thedeatons]

Yep, I have the 38mm PWK AirStriker for sale. It says for race use only on the side, probably ordered from Sudco. I can installl any main jet you want in it before shipping it.... If you are interested please PM me. Thanks! James

[dts54]

I tried to PM you and it said I cant send you a PM because your mailbox is full. May want to look at that. I will keep trying as I am interested in making a deal.
Dean

[thedeatons]

Just cleaned it out Dean... :)

I can give you my phone number if you need it....

James


STILL HAVE A RADIATOR AND SHROUDS, ETC FOR SALE.

[thedeatons]

I still have these parts left guys... I need to liquidate quickly, need money....

James

http://i709.photobucket.com/albums/ww92/thedeatons/DSC00623Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC00624Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC00625Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC00626Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC00627Large.jpg

http://i709.photobucket.com/albums/ww92/thedeatons/DSC00628Large.jpg

[knobbyboy]

pm sent

[thedeatons]

PMs returned!

[thedeatons]

Okay guys... The only thing left is the OEM radiator and shrouds, along with the front brake master cylinders...

$45 shipped for the radiator & shrouds

$15 shipped for the 250R front brake master cylinder

I will be in Yellowstone this next week, but will try to answer PMs as best as I can.

James

[knobbyboy]

great seller here guys. i got this 3.6 g tank. shipped fast, well packaged and a good price.

[dts54]

Bought the carb and WOW what a deal! This is a super seller! He's the the guy to buy from. THANKS!
Dean

[RyanWsly]

Bubble wrappin fool this guy is, most well protected shipment I have ever received in my life. Pleasure to deal with. Thanks