Arens frame: Rear Brake Lever Question

[danhung11]

I know they take a CR pedal, does anyone if they make an aftermarket CR pedal?

Thanks!
Dan

[hang1p]

i used a esr 250r billet lever for a while you could not use the stock return spring and it seemed a little out of position but worked great until i started doing a little mx i like the cr lever position better.

[danhung11]

Do you know if the CR150 and CR250 utilizes the same pedal? BBR makes a nice one, their website shows a picture that looks like it will work.

Let me know after you take a peek.

Thanks for the reply.
Dan

[1promodfan]

Dan, I'm not sure if mine is aftermarket, but it did polish out well. I don't think a stock one will polish out. So, I'm guessing mine is aftermarket.

[danhung11]

Originally posted by 1promodfan
Dan, I'm not sure if mine is aftermarket, but it did polish out well. I don't think a stock one will polish out. So, I'm guessing mine is aftermarket.

Mine is oem cr250 pedal. The actual pedal part is cheesy and I was curous if the BBR fit. They make one for a cr150.

So I guess, I am looking to buy POS used CR150 pedal to see if it will bolt up.

I'll post a wanted ad and keep everyone posted. I know there are a few of us with Arens franes.

Dan

[ESR250R]

i just put a regular cr250 pedal on mine just like john arens suggested to me, and everytime i kick the bike over the kickstarter gets caught on the brake pedal.

[danhung11]

Originally posted by ESR250R
i just put a regular cr250 pedal on mine just like john arens suggested to me, and everytime i kick the bike over the kickstarter gets caught on the brake pedal.

There is no need to kick it down that far. Adjust the master cylinder to make the pedal a tad lower. It's a little better on mine.

[ESR250R]

i've taken the adjustment out as far as possible, it still catches. if i just tap the brake with the heel of my foot it comes right back up so it isnt a big deal.

[1promodfan]

Mine catches too.....its no big deal. I just tap the brake pedal and the kick just comes back up.

[Motofool250r]

can you guys post a pic im begining to wondering if my JP frame takes a cr250 pedal instead of trx pedal