how bad would it to be to ride like this

[Sweendogie]

the cylinder is fine but there was a washer in the cylinder... the dents arent bad at all but would it be alright to put together and ride for a weekend?



http://i17.photobucket.com/albums/b61/sweendogie/IMGP2137.jpg
http://i17.photobucket.com/albums/b61/sweendogie/IMGP2138.jpg
http://i17.photobucket.com/albums/b61/sweendogie/IMGP2140.jpg
http://i17.photobucket.com/albums/b61/sweendogie/IMGP2142.jpg
http://i17.photobucket.com/albums/b61/sweendogie/IMGP2143.jpg
http://i17.photobucket.com/albums/b61/sweendogie/IMGP2145.jpg

[redrocker]

AS long as the valves aren't bent
hole head up right spray garb
cleaner in ports and see if it
leaks pass the valves seat if
it does then lap valves if not
I would run it

[Sweendogie]

Originally posted by redrocker
AS long as the valves aren't bent
hole head up right spray garb
cleaner in ports and see if it
leaks pass the valves seat if
it does then lap valves if not
I would run it

it doesnt leak the valves are fine what about the piston?

[Pack]

You can ride for a weekend with no harm, I just wouldn't push it too far.

[trx400 rider]

ok can some one tell me how to get the timeing chain off with out messing it up or the time. i see you took yours off.

[Sweendogie]

just make sure your piston is at top dead center then zip tie your chain to your frame so it wont fall into the engine

[Ride1Rob]

If u really don't know what ur doing I suggest leave it alone and take it to someone that knows what they're looking for.