Anyway to get power out of your bike easily???

[longtimeridr777]

So what i am wondering here is like on honda if you cut a wire it opens the bike up. I was just wondering if there is anything like that on my 04 yfz? If not, what are some good add-ons for these bikes. My 04 has a slip-on exhaust, and K&N filter. The bike is also jetted. Im not looking to rebuild the motor, but besides that what would open this bike up? Thanks for your replies!

[mxpimp2000]

cammod
jets
ncqv needle
uni air filter
remove box lid
slipon pipe
zip tie mod

thats about all u gonna get outta it unless u want to get a HC piston and all that cams etc.

[longtimeridr777]

I was going to change up my sprockets for more top end.

[mxpimp2000]

Originally posted by longtimeridr777
I was going to change up my sprockets for more top end.

if u have the big razr2 tires it should have quite abit of top end, u could drop a tooth in the front since u have xc tires and get some more power.

[longtimeridr777]

Well the tires i run in the back are only 20 inch tires. They are not the 22's. So it doesnt help me on the top end.

[yamaha_maniack]

you can bore it out, intake, exhaust... not sure what some of the other stuff is though..
good luck man!

[myersracing41]

Originally posted by mxpimp2000
cammod
jets
ncqv needle
uni air filter
remove box lid
slipon pipe
zip tie mod

thats about all u gonna get outta it unless u want to get a HC piston and all that cams etc.

Zip tie mod??? What exactly does this do?
Thanks Jason

[mxblastermx]

What type of pipe you have on it?

Cams
port and polish(one of the best things)
high compression piston
velocity intake
Idk theres tonssss of stuff you can do

[mxpimp2000]

eliminates the bog when u punch the gas, so it dosent fall on its face. it helped mine alot

[standardryder]

Originally posted by mxpimp2000
eliminates the bog when u punch the gas, so it dosent fall on its face. it helped mine alot

That should be a sticky! I've never even heard of that, I just did it and it's insanely better, doesnt cut out when I punch it. R&D makes a heavy duty spring to do it "right". I'll be ordering that soon.

[mxpimp2000]

Originally posted by standardryder
That should be a sticky! I've never even heard of that, I just did it and it's insanely better, doesnt cut out when I punch it. R&D makes a heavy duty spring to do it "right". I'll be ordering that soon.

im pretty sure its posted on here somewheres, i know it is on yfzcentral.com step by step. i never bought a R&D or quickshot2 or changed the leak jets. my carb is all stock except the jetting and air screw with the zip tie mod done to the accel pump.

i have NO BOG at all 0%. i love it

[standardryder]

Nice. Mine was completely cutting off, I was having a hell of a time figuring it out. I get a little hiccup now and a pop with a shot of flame on the decel so my jettings still a little off.

[mxpimp2000]

yeh try pilot jet. my jetting was a little rich and i change my header to a full hmf header and now the jetting is perfect starts right up cold or hott first crank

[myersracing41]

Originally posted by mxpimp2000
eliminates the bog when u punch the gas, so it dosent fall on its face. it helped mine alot

Thanks for the tip, I will try that.

I just put a full HMF on mine and now rejetting it.
I did change my leak jet to a 35 before to help with the bog, and it did smooth it out a little but not enough.

[mxpimp2000]

i have a 172 main and 46 pilot and stock needle in 3rd clip.

[mhood121]

not sure if its for 07s only, my buddy did the timing mod, retard one tooth, huge difference, sorry if its for 07s only,