raptor top speed

[yamahahaha]

hwats the best uv seen?!?!?!:blah: :blah:

[borgoleo]

i think top speed can be close to 90 mph .......stock form

[yfzrider690]

No way a stock raptor will do 90 with stock gears. More like around 75.

[borgoleo]

No way 75 is to slow i think 85 easly

[yfzrider690]

You are crazy if you think a stock raptor will do 85. My dad has one and I know for a fact it doesn't go that fast. They just did a review in dirt wheels a couple of months ago and it was in the mid 70's.

[LotusPosition]

The Raptor 700 has a top speed limiter on it. It will not exceed 75 mph in stock form.

[borgoleo]

maybe your yfz 450 only can hit 75 mph ,,,that is the problem here, the yfz 450 guys are hard to recognise a raptor 700 can reach more top speed....ok?

[yfzrider690]

You are an idiot. Have you ever rode a raptor. My dad has one and my yfz smokes it and I know my yfz doesn't do anywhere close to 85 topped out. And both of our bikes have the same mods. Pipe, filter and rejetted, he has a programmer. Do some research before you spew anymore ridiculous crap out your mouth.

[borgoleo]

you sucks man simply raptor 700 cm3 yfz 450 cm3 700-450=250cm3 advantage....you are a retarded ok a litle 450 cant gou at the same top speed like a raptor 700 remember 250 cm3 more!!!!!now what to say?

[yfzrider690]

Well first off I don't know what you are talking about. cm3? It's cc's. Maybe you should have a clue what you are talking about before you say something. Do you even ride. I doubt it. I have access to both bikes and I'm telling you straight up that the raptor will not do 85 stock. Now if you change the gearing that's a different story. Most newer 4 strokes will do 85 if you regear.

[yamahahaha]

maybe u should settle down and know what ur talking about, u said ur dad re-jeted a raptor,,,its fuel injected! and my buddy had an 06 that will easily break 90mph, stock, it did 88 with an extra person on the back on ice (he is nuts)

[BrettOaktree]

Originally posted by yamahahaha
maybe u should settle down and know what ur talking about, u said ur dad re-jeted a raptor,,,its fuel injected! and my buddy had an 06 that will easily break 90mph, stock, it did 88 with an extra person on the back on ice (he is nuts)

alright, alright now ur takin it too far, i kno for a fact that a raptor 700 will not do 90 stock, more like 75-79 change out the sprockets and maybe you will get it up to 85. And to borgoleo dont say little 450 because its been proven and proven time again that the yfz is faster stock for stock with 2 riders of the same skill level and dont try to prove a point off of what you would think is common sense, no 250 more ccs does not mean its going to be faster especially when the 450 is 50lbs lighter, revs 2500 rpms higher and revs twice as fast, therefore giving it a much better power to weight ratio, and no my opinion is not biased because i own a 450 im a modest guy and i tell the truth. And to yfzrider690 dont try and make him look like an idiot, hes from argentina and thats probably what they call ccs over there, every country is different. So now i thinks its time for you both to apologize to eachother and leave it at that cuz at the rate you 2 are going your gunna get this post shut down for trying to start a fight.

[yfzrider690]

Originally posted by yamahahaha
maybe u should settle down and know what ur talking about, u said ur dad re-jeted a raptor,,,its fuel injected! and my buddy had an 06 that will easily break 90mph, stock, it did 88 with an extra person on the back on ice (he is nuts)

Maybe you should read the post and understand it before you quote. I said my bike is rejetted and he has a programmer. No where in the paragraph did I say that his bike was rejetted. And I guarantee your buddies bike did no where close to 90 with stock gearing. And 88 with a person on the back, give me a break.

[IRISH-RACER-14]

Originally posted by borgoleo
you sucks man simply raptor 700 cm3 yfz 450 cm3 700-450=250cm3 advantage....you are a retarded ok a litle 450 cant gou at the same top speed like a raptor 700 remember 250 cm3 more!!!!!now what to say?

the yfz450 is a race quad....its bound to be faster than the 700r... the 450 hasnt got reverse...its also lighter

[BrettOaktree]

alright why dont we stop arguing and start giving this guy answers, his post says nothing about stock, whats the best you guys have seen out of a raptor irregardless of mods or no mods?

[borgoleo]

And raptor 700 is not a race atv?? i think raptor 700 have more hp and more speed

[yfzrider690]

See that's your problem is that you think to much and don't actually know. Look it up, both the raptor and the yfz put out right around 40hp stock, give or take a couple depending on the dyno. And no the raptor is not a race atv, that's why they make the yfz.

[BrettOaktree]

alright now i agree with yfzrider

[trx400 rider]

ok they have a law that an stock atv cant go over 80. or the atvs companies would be making them a lot faster stock. not saying a dirtbike they aloud to go well over 80 like the crf450 for example does much more then 80.but ant atv is not aloud over 80. so a raptor will not do more then 76 my freind has one and my other friend has a yfz and they pretty neck and neck.

[borgoleo]

Raptor 700 have more hp stock like 5 more hp and YES is a race atv from other category...in top speed are close i think raptor can make 3 more mph

[yfzrider690]

The raptor is considered a sport quad. The yfz is yamaha's race bike that's why the suspension is better and they sit lower. Go to the races and see how many raptors there are. I will bet you anything you see more yfz's than raptors.

[RATPACK Z400]

me and friend lined up my Z his Raptor and another friends car i got to 73mph he got 75mph on flat road no down hill just flat theres no way it can hit 80 without larger tires in rear like 22in and changing the sprockets ,then you would hit 80-90mph depending how large the front is and how small the rear is to hit that speed Im guessing 15 front 37 ,90mph would be 15 /36 guessing with 22in rears .tires and sprocket,rev-limiter are the only way to change top speed.

[Backstabber]

LOL, this is some of the most rediculous crap I've ever read. There are a few guys here with some sense in thier head. The stock 700r will NOT do 90 or 85. My friends yfz walked past my other friends 700r, both in stock form right in front of my eyes. I have a 700xx, those top at 80 in stock form and I know they're faster than the 700r on the top end, assuming both are in stock form. How do I know this? What are my crudentials? I ride with a yfz, built rappy 660r, stock 700r and fully built 700r. I've raced them and I know what they can do. My video where I race the 700r I simply let off after I slapped the gas tank into my chest, my fault for the horrible launch. Check out my page, you'll see the results...

http://www.youtube.com/user/fastfirstgen

[hondarace83]

Why fight about this? why not just get a stock 700 side by side with a car and put it on youtube. Problem solved. Btw my stock 660 hits 85 minor mods

[yfzrider690]

You're raptor isn't hitting 85 with stock gearing. There is no way. I had one before I got my yfz and my yfz walked all over my 660. If you are running bigger tires and taller gears than I would believe you, but with stock gears and 20 inch tires there's no way.

[hondarace83]

Just seems to me that some of you need to grow up and stop getting pissed off because someone can get alittle more top speed out of a bike than you can. The gears are aftermarket and im running 12's. Not forsure what gears yet i just got the bike yet and havent had a chance to tear into the gear case.

[yfzrider690]

Originally posted by hondarace83
Just seems to me that some of you need to grow up and stop getting pissed off because someone can get alittle more top speed out of a bike than you can.

I'm not getting pissed, I'm just saying that with stock gears and tires there is on way possible you are hitting 85 unless you are going down a big *** hill.

[hondarace83]

I was editing my post and answering your question while you was posting lol

[yfzrider690]

That is funny. I'm not talking about the gears in the tranny, I'm talking about your sprockets. It would have to be geared up a couple teeth on the rear or front to get that high of a speed. With stock gears you could probably get low to mid 70's and that's it.

[hondarace83]

Originally posted by yfzrider690
That is funny. I'm not talking about the gears in the tranny, I'm talking about your sprockets. It would have to be geared up a couple teeth on the rear or front to get that high of a speed. With stock gears you could probably get low to mid 70's and that's it.

Sprockets = chainwheel tranny = gears, how is that funny? your the one that used the wrong description to ask a question.

[yfzrider690]

I was saying that it was funny that you were editing the same time I was posting.

[hondarace83]

Originally posted by yfzrider690
I was saying that it was funny that you were editing the same time I was posting.

Ah guess that is funny. In the future say chainwheel tho instead of gearing you will get the right answer quicker lol

[yfzrider690]

Actually they are called sprockets. But most people when they talk about changing the sprockets they say they are gonna gear it down or up. I never heard it called a chainwheel before. That is a new term to me. I have been riding for 26 years and never heard that.

[DustyRaptor]

How about some facts... I have a Trail Tech dash on my 06 Raptor 700 that will read mph and I have compared it with my buddies truck and we were within one mph about 70 so its pretty close...

Stock they have a sensor so in 5th gear at a certain rpm is starts to slowly retard your timing so it wont pull, most guys I have talked to (forums) claim 72-74mph stock form... Pull the speed limiter and I have heard of a 3-4mph gain in stock form (stock sprockets/tires)

I put a 15t front sprocket on and havent bypassed the speed limiter and my dash and buddies truck read 78-79mph with 20" Razr2 rear tires, I wasnt to the redline yet but it was all I wanted to push my motor (slightly built)

[hondarace83]

Originally posted by yfzrider690
Actually they are called sprockets. But most people when they talk about changing the sprockets they say they are gonna gear it down or up. I never heard it called a chainwheel before. That is a new term to me. I have been riding for 26 years and never heard that.

learn something new everyday lol

[borgoleo]

Maybe something is wrong whit your 700!!(or you dont drive good) i can gou 80 on paved surface all stock my friend was whit a ford ranger neck to neck and he say wee hit 80!!

[camaromitch]

Originally posted by borgoleo
Maybe something is wrong whit your 700!!(or you dont drive good) i can gou 80 on paved surface all stock my friend was whit a ford ranger neck to neck and he say wee hit 80!!

Is that your seat of the pants speedo when you are on a paved surface? Don't just say how fast you were going, how do you know you were going that fast? And tell your buddy to get his speedo recalibrated in his ranger ;)

[odog]

like the trx guy said early no raptor or any other quad for the matter is going over 79 mph its the law the manufactor will not allow the quads to go over 80 anyone that says they are is just lying to you. it doesnt take much to get a 700r over 80 but with the stock rev limiter its just not going to do it thats why they put it there call yamaha.

[tayyo789]

even on a hill, there is no production bike that will reach those speeds due to the rev limiter/rev box/cdi whatever you decide to call it to try and prove me wrong. i built a hybrid with an xr650r and it will reach those speeds but i have the cdi directly from honda that they put on their baja xr's. and my rear sprocket is dropped 10 teeth. without aftermarket cdi and gearing coupled with the power, you will NEVER reach those speeds. period

[wrekd]

The 700 has a speed sensor on it that won't let it go over 75mph. Its retards the timing at 5500rpm and up. Ground the blue wire coming fom the ECU to to the speed sensor and you'll pick up around 6-8 mph.

[borgoleo]

Can u explain how to unplug the speed sensor plis?? i need go faster !!!!!!

[wrekd]

http://www.raptorforum.com/forums/showthread.php?t=56030

[BuDDy L]

first of all your a ****in retard...cm^3 means cubic centimeters aka CC'S!!!!, do not talk....first of all half of you know nothing, i hopped on here to see if i could sell my 660 fully worked with holographic paint but found this ****...this is retarded, most of you know nothing, the people over at 250r section are 100X more knowledgable than you guys, jesus, a raptor 660 like i have is better because it does not have the rev limiter on the top end, of course you can disable it but to be honest i can race *MOST* of you on my 660 and whip you on your 700 just because like someone else said, cc's will not just make you go faster, skills will, you cant buy those. and to people who think the higher the cc the faster, your retarded too, its true to an extent, and what do you mean by faster?????????????????, a straight line lmfao. race my honda 250r and talk ****, you wont youll be eating my staring at my grab bar. If you want to go in a straight line buy a banshee thats all their good for. Raptors are torque, yfz450's are MOTOCROSS QUADSSSSSSSSSSSSSSSSSSSSSSSS, the 450 might beat the raptor in small drag by your trailer homes but if you went to new york and did an actual drag say 1/4 mile or 1/8, the raptor would catch up and beat it by a few lenghts, please if you google.com your info and say your dad owns everything do not post, im sick of it and i only read one page in this section, do not call some retarded yourself when your an idiot too, o and just in case someone wants to debate this, i dont know because i got sick on the firs tpage, the banshee is not 700cc 2 stroke, its a 350 twin meaning 175+175, that was just in case anyone said it, im not sure, now that you wasted 5 minutes of my time, im off to college, probably late, driving my 2007Suzuki DRZ-400, pzzzz

Originally posted by yfzrider690
Well first off I don't know what you are talking about. cm3? It's cc's. Maybe you should have a clue what you are talking about before you say something. Do you even ride. I doubt it. I have access to both bikes and I'm telling you straight up that the raptor will not do 85 stock. Now if you change the gearing that's a different story. Most newer 4 strokes will do 85 if you regear.

[wrekd]

Originally posted by BuDDy L
first of all your a ****in retard...cm^3 means cubic centimeters aka CC'S!!!!, do not talk....first of all half of you know nothing, i hopped on here to see if i could sell my 660 fully worked with holographic paint but found this ****...this is retarded, most of you know nothing, the people over at 250r section are 100X more knowledgable than you guys, jesus, a raptor 660 like i have is better because it does not have the rev limiter on the top end, of course you can disable it but to be honest i can race *MOST* of you on my 660 and whip you on your 700 just because like someone else said, cc's will not just make you go faster, skills will, you cant buy those. and to people who think the higher the cc the faster, your retarded too, its true to an extent, and what do you mean by faster?????????????????, a straight line lmfao. race my honda 250r and talk ****, you wont youll be eating my staring at my grab bar. If you want to go in a straight line buy a banshee thats all their good for. Raptors are torque, yfz450's are MOTOCROSS QUADSSSSSSSSSSSSSSSSSSSSSSSS, the 450 might beat the raptor in small drag by your trailer homes but if you went to new york and did an actual drag say 1/4 mile or 1/8, the raptor would catch up and beat it by a few lenghts, please if you google.com your info and say your dad owns everything do not post, im sick of it and i only read one page in this section, do not call some retarded yourself when your an idiot too, o and just in case someone wants to debate this, i dont know because i got sick on the firs tpage, the banshee is not 700cc 2 stroke, its a 350 twin meaning 175+175, that was just in case anyone said it, im not sure, now that you wasted 5 minutes of my time, im off to college, probably late, driving my 2007Suzuki DRZ-400, pzzzz


:huh

I think you need to take an extra grammar class. Your punctuation and sentence structure skills are horrible.

[BuDDy L]

Originally posted by wrekd
:huh

I think you need to take an extra grammar class. Your punctuation and sentence structure skills are horrible.

listen buddy, im in college, its a computer, on a keyboard, not life, relax, mad im right?

[wrekd]

Originally posted by BuDDy L
listen buddy, im in college, its a computer, on a keyboard, not life, relax, mad im right?


Mad your right??...LMAO!!... Your WHOLE post was useless and full of garbage.

[BuDDy L]

Originally posted by wrekd
Mad your right??...LMAO!!... Your WHOLE post was useless and full of garbage.

no.......but you know what is....a 400ex lmfaoooo hahahahaha

http://img442.imageshack.us/img442/4566/poster67078412.jpg

[wrekd]

Originally posted by BuDDy L
no.......but you know what is....a 400ex lmfaoooo hahahahaha

http://img442.imageshack.us/img442/4566/poster67078412.jpg



I guess its time I finally change my sig.

ANYTIME you wanna bring that little 250 down, you're more then welcome. Bring your pink slip/title and ill bring mine. Don't bother bringing a trailer cause you wont need it :p

[BuDDy L]

Originally posted by wrekd
I guess its time I finally change my sig.

ANYTIME you wanna bring that little 250 down, you're more then welcome. Bring your pink slip/title and ill bring mine. Don't bother bringing a trailer cause you wont need it :p

lol let me post in the 250r section and have them all laugh at you thinking you would beat me on the track with your 383747 pound piece of metal

[wrekd]

I didnt say nothing about a track. Theres a stretch of abandoned road we race on thats about a half mile long right by my house. Like I said, bring your pink slip :D

[camaromitch]

Originally posted by BuDDy L
lol let me post in the 250r section and have them all laugh at you thinking you would beat me on the track with your 383747 pound piece of metal

Wow buddy, you want to tell wrekd how much faster than him you are and when he challenges you all you can say is "let me tell the other fanboys!!!". And you are going to be ignored as long as it looks like you are just slamming your teddy bear against the keyboard to make sentences. 383749 lbs? Calm down dude.

[BuDDy L]

Originally posted by camaromitch
Wow buddy, you want to tell wrekd how much faster than him you are and when he challenges you all you can say is "let me tell the other fanboys!!!". And you are going to be ignored as long as it looks like you are just slamming your teddy bear against the keyboard to make sentences. 383749 lbs? Calm down dude.

do you touch yourself at night

[camaromitch]

Originally posted by BuDDy L
do you touch yourself at night


^? 7 hours to come up with something and you ask if I touch myself? Grow up.

[BuDDy L]

Originally posted by camaromitch
^? 7 hours to come up with something and you ask if I touch myself? Grow up.

7 hours???its not like i jerk off to the forum every minute guy calm down

http://www.youtube.com/watch?v=Epd9rRYh2jY&feature=related

raptors are too heavy, thats a huge problem, i have owned many racing quads, pretty much everything but the banshee and the yfz450

[mikecancu812]

I got my daughters PW50 up to 88 mph with some slight tweaking of the karooder valve. So a Raptor has 650 cc's more than the PW does. I'm guessin a Raptor can hit about Mach 4 at least

[78250r]

yup my brother has a 700raptor in his wildest dreams will it do 80 let alone 90 he is 4yr journeymen mech and by the time hes done it will haha installing turbo and gears and the works

[78250r]

haha this is awesome sounds like me and my brother fightin he has 700raptor i have honda 250r with some mods his is nice mine will be before i broke my clutch pin housing {put a hole in the left case} i could keep up with him who got the hole shot would determine who won the race when he YES he puts mine back together haha i should smoke him displacing 285 or so ccs and 110 octane as far as fighting goes he got right pissed off at me when i broke mine because we couldnt compete against each other so the point is everyone is amazing listening to you fight is hilarious so keep it up and just to add fuel to the fire hehe the kxf 450 spanked the yzf450 {both carburated} in a race put on by no other atvrider magazine ha oh ya the silly speed thing stock 75 tops

[backwoodsracer]

Originally posted by borgoleo
maybe your yfz 450 only can hit 75 mph ,,,that is the problem here, the yfz 450 guys are hard to recognise a raptor 700 can reach more top speed....ok?

I feel sorry for you if your yfz dosnt hit 75 my stock grizzly 660 hits 73.............. so

[borgoleo]

Raptor 700 are too heavy??you are wrong! i was in yamaha webpage and cant believe (see yourself) wet weight raptor 700 422.... wet weight yfz450r 405 lbs....... Where is too heavy??u must informate after give a decent opinion

[09RappySe]

Who cares how fast it goes.......its all about how fast it gets there.

[XC_Raptor700R]

Originally posted by 09RappySe
Who cares how fast it goes.......its all about how fast it gets there.

Exactly !!! If I want top speed ... then I'll get a R1.

[trx400 rider]

theres no point in fight this page is made for helping and talking about your atvs.if you know anything about atvs you know there is a law about making them go over 79mph STOCK! so we tired helping them and tell them theres no way it goes over 79mph. so if they dont listen then idk why they even bother even being on here cause they think there right and if there always right you dont need no ones help. so if you think in your head you stock atv go over 79mph fine think that way... but just stay in your dream world and keep your dream world to your self cause for the people that know atv stuff we dont want to hear your dreams about your atv.

[700xxmaniac]

Originally posted by trx400 rider
theres no point in fight this page is made for helping and talking about your atvs.if you know anything about atvs you know there is a law about making them go over 79mph STOCK! so we tired helping them and tell them theres no way it goes over 79mph. so if they dont listen then idk why they even bother even being on here cause they think there right and if there always right you dont need no ones help. so if you think in your head you stock atv go over 79mph fine think that way... but just stay in your dream world and keep your dream world to your self cause for the people that know atv stuff we dont want to hear your dreams about your atv.

there is no law yamaha just did that so ppl wont hurt them self going the 80+ that a yamaha raptor can do with the limiter taken out.... it may take 1000ft but a raptor can do 83 stock..... if it was a law the trx450 would have a limiter too.. the trx700xx has a limiter but its at 88mph and stock it donst have the top end to do it....big 3 on the xx will take u to 88mph its ben proven... i think a raptor could do the same with big 3....with enouph space though....

if u dont belive me that is not a law look at the banshee's after the first two years of being out yamaha made the port really small and put one of the most restrictive pipes on it couldent go as fast....

[wrekd]

I just gps'ed mine the other day and pulled 82 mph. 14/36 gearing with 21x12-9 Mudsharks in about 3/4 of a mile. I'm 6'1'' 290lbs.
I might of got 2 or 3 more out of it if I lost 100lbs...lol

http://i68.photobucket.com/albums/i31/wrekd96/028-1.jpg

[XC_Raptor700R]

I been wanting to check mine in each gear, I did hit the rev limiter the other day in 2nd going 41.0 mph.

[yamahahaha]

isnt there a baby blue colored wire that can b cut to get more top speed out of it???

[XC_Raptor700R]

Originally posted by yamahahaha
isnt there a baby blue colored wire that can b cut to get more top speed out of it???

Yeah, but it causes the check engine light to stay on.

[yamahahaha]

does cutting that wire make much difference?

[XC_Raptor700R]

Originally posted by yamahahaha
does cutting that wire make much difference?

I haven't tried it myself, I don't need a faster 5th gear. If I remember correctly, the speed limiter restricts the rpm's at 6,500 in 5th gear.

[700xxmaniac]

Originally posted by XC_Raptor700R
I haven't tried it myself, I don't need a faster 5th gear. If I remember correctly, the speed limiter restricts the rpm's at 6,500 in 5th gear.

@6,500 rpm is when the the trim is backed off so it wont make as much power

[wrekd]

Originally posted by XC_Raptor700R
Yeah, but it causes the check engine light to stay on.



Not if you ground the wire out. I've had mine done for a while and its never come on.

[yamahahaha]

much improvement?

[Tommy Warren]

wow...just wow...some of the stupidest chit I've ever read....both the 660 and 700 only do 75MPH in stock form. you can cut the baby blue wire on the 700 and you have to grind the teeth off of the speed limiting gear on the 660. I've done this on the 660 and now get 82 with my 686....and yes Buddy L there is a top speed limiter on the 660.....its like amateur hour in here...thats why I don't talk raptors on a exforum..:huh :rolleyes: :ermm:

if u wont to know how fast a 700 raptor will run top speed stock then put a gps in ur pocket but frist reset the max speed then run it my friends will only run 73 on a good and 70 a bad day......

[yamahaXC13]

stock?? 70 to 75 mph tops, i ride trails mostly, i dont worry 'bout top speed too much, i put an exhaust system on mine for some more bottom and midrange power, it didnt do anything for top speed, just helps me get there a little faster

[Thumpin440ex]

LMAO old thread I know, but was just brought back up from the prev poster. I have to agree with some of the guys in here who say some of ya don't have a clue what your talking about.. The OP never wanted to know how fast it went with out the limiter or the wire grounded out, or if the sprockets were changed around. Just WHAT IT WOULD GO IN STOCK FORM. The answer to that is not 80 MPH.. Not happening, def not on stock gearing.. It was actually a pretty comical read for me. Don't get all *** hurt, post something stupid back if you were offended. It will just add to what some of us have posted :D Remember GEARING = RPMs IF YOU HAVE SPROCKETS THAT ARE LOWER( more teehth-stock) SO IT WINDES OUT FAST you will REDLINE before you make certain ungodley speeds some of you are claiming on stock gearing and stock redline

John