ZRider400
06-20-2009, 10:25 PM
Just built this, has 1 ride on it. Decided i want to get a yfz450r, so this is going... Probably going to kick my self in my own a** , but i always get bored quick and change my mind alot... so here we go.
Quad sits how it is in the pics, most everything was new or powdercoated
Here are some prices:
2003 JRD Frame, flip top subframe, a-arms, swingarm, adjustable steering stem, quick release front fender mount, Pro peg Nerf bars, and Grab bar,
Comes with mounts for CRF450, YZF and 250R (some were bought from a diff chassis, but will work on this with slight modifications) I have over 400 dollars in extra motor mounts.
Everything has FRESH POWDERCOAT with 1 ride... Also throwing full chassis skid with it, and JRD aluminum no-link AIRBOX and intake boot!
***$2,100 Shipped!***
axis rear shock $375 shipped
Full bore plastic front and rear , rear plastic was trimmed near exhaust, and has 1 spot where it slightly melted from exhaust heat. These are new with 1 ride. Come with full BVC graphics kit installed. Also comes with all fullbore mounting hardware and NEW oem honda grommets.
**** $375 shipped****
Elka Dune edition front shocks 19 1/4'' to 19.5'' long i believe setup for roll LT front end, with 175 pound rider.
These are new with 1 ride
quad rate, ride height adjust / piggy back rezzys no adjustments.
******$549*****
2003 CRF450 motor Fully built , comes with all electrical , carburetor, spark plug, kill switch, Clutch cable, and throttle cable to work with honda throttle.
Ported by JC racing, New valves/seats, 13.5:1 piston, Hinson clutch, DREAM billet water pump cover. I just rebuilt the water pump also, new shaft/seals/impeller (known to leak)
*******$1650 Shipped******
250R seat, with brand new gripper cover ready to install
****$100 shipped***
250R gas tank $ 50.00 shipped
400ex front spindle/caliper/hub, Brake lines and master cylinder setup ready to go on a 400ex, or trx250r. Great upgrade for 250r. Just installed brand new pads, and wave rotors on these
***$250.00 ***
250r rear durablue axle , this is a older style + 4, dull finish , appears to be straight...works great. *** $ 200 shipped***
250r RPM antifade lock nut, new with 1 ride, some scratches on it
150 shipped or 185 with new wave rotor
250r rear master cylinder/brake guard/pedal and caliper with new pads
***150 shipped***
AC front bumper **45 Shipped**
250r dual row bearing carrier
this is mint
** 95 shipped***
frame or motor must go before i start taking this apart!
Quad sits how it is in the pics, most everything was new or powdercoated
Here are some prices:
2003 JRD Frame, flip top subframe, a-arms, swingarm, adjustable steering stem, quick release front fender mount, Pro peg Nerf bars, and Grab bar,
Comes with mounts for CRF450, YZF and 250R (some were bought from a diff chassis, but will work on this with slight modifications) I have over 400 dollars in extra motor mounts.
Everything has FRESH POWDERCOAT with 1 ride... Also throwing full chassis skid with it, and JRD aluminum no-link AIRBOX and intake boot!
***$2,100 Shipped!***
axis rear shock $375 shipped
Full bore plastic front and rear , rear plastic was trimmed near exhaust, and has 1 spot where it slightly melted from exhaust heat. These are new with 1 ride. Come with full BVC graphics kit installed. Also comes with all fullbore mounting hardware and NEW oem honda grommets.
**** $375 shipped****
Elka Dune edition front shocks 19 1/4'' to 19.5'' long i believe setup for roll LT front end, with 175 pound rider.
These are new with 1 ride
quad rate, ride height adjust / piggy back rezzys no adjustments.
******$549*****
2003 CRF450 motor Fully built , comes with all electrical , carburetor, spark plug, kill switch, Clutch cable, and throttle cable to work with honda throttle.
Ported by JC racing, New valves/seats, 13.5:1 piston, Hinson clutch, DREAM billet water pump cover. I just rebuilt the water pump also, new shaft/seals/impeller (known to leak)
*******$1650 Shipped******
250R seat, with brand new gripper cover ready to install
****$100 shipped***
250R gas tank $ 50.00 shipped
400ex front spindle/caliper/hub, Brake lines and master cylinder setup ready to go on a 400ex, or trx250r. Great upgrade for 250r. Just installed brand new pads, and wave rotors on these
***$250.00 ***
250r rear durablue axle , this is a older style + 4, dull finish , appears to be straight...works great. *** $ 200 shipped***
250r RPM antifade lock nut, new with 1 ride, some scratches on it
150 shipped or 185 with new wave rotor
250r rear master cylinder/brake guard/pedal and caliper with new pads
***150 shipped***
AC front bumper **45 Shipped**
250r dual row bearing carrier
this is mint
** 95 shipped***
frame or motor must go before i start taking this apart!