Falcon Fan
06-15-2009, 04:25 PM
am wanting to check interest on these arms, and shocks. I am going to be getting some new lonestar a-arms as well as some elkas so these need to go. The only thing wrong with these arms is that the right lower arm is going to need a ball joint. I broke when i was racing a couple of weeks ago. I have been in a cast since the wreck so i got about another week before this cast comes off, but i think the ball joint will be fixed before the 4th of july a big ride is planned for that weekend and am going to be putting the new arms and shocks on after that weeekend. Elka is like 3 weeks out. As for the shocks they are in very good condition not alot of wear on them but if you are as picky as me they could probably use a service if you plan on airing it out. But i just been doing some Flat Track racing and they aint given me any problems. They are set up for a 200-225 lbs. rec rider. I have used these on the MX track as well as woods and TT and they are fine for all apps. The arms will come with tie rods. And i could even throw in the steel braided lines and billet clamps with these arms if they are wanted. I am just checking interest on these right now. Let me know if you have any questions. I can get some better pictures but keep in mind of the right a -arms is not attached to the knuckle. Also would be interested in some trades let me know what you got !!
http://i54.photobucket.com/albums/g85/KansasZ400/042309_200800.jpg
http://i54.photobucket.com/albums/g85/KansasZ400/IMG00042.jpg
http://i54.photobucket.com/albums/g85/KansasZ400/HPIM0456.jpg
http://i54.photobucket.com/albums/g85/KansasZ400/Balljoint.jpg
http://i54.photobucket.com/albums/g85/KansasZ400/042309_200700.jpg
http://i54.photobucket.com/albums/g85/KansasZ400/042309_200800.jpg
http://i54.photobucket.com/albums/g85/KansasZ400/IMG00042.jpg
http://i54.photobucket.com/albums/g85/KansasZ400/HPIM0456.jpg
http://i54.photobucket.com/albums/g85/KansasZ400/Balljoint.jpg
http://i54.photobucket.com/albums/g85/KansasZ400/042309_200700.jpg