PDA

View Full Version : Clutch problems


MikeRWK
06-10-2009, 12:20 PM
When i have the clutch disengaged on my bike its still engaged a bit, the bike will actually keep moving very slowly, its not my clutch cable i adjusted it. When i rev the bike it will fully disengage but when the revs come down it engages again?
dirtdawg
06-10-2009, 12:36 PM
check the adjustment inside the case on the clutch pack. if it isn't adjusted right in there, it will have problems.
MikeRWK
06-10-2009, 12:42 PM
So im gonna have to split the motor pretty much?
dirtdawg
06-10-2009, 02:23 PM
just the right side case, maybe like 8 bolts. it doesn't require you to split the whole thing up. just the side case. download the manual in the other post and it will tell you what to do.
timmy400exfast
06-11-2009, 08:34 PM
^agreed^
beeze455
06-12-2009, 07:23 AM
I got the same thing going on and i have adjusted both outside cable settings, so it looks like I am going to take that off. If I tighten the cable more using those settings, it just causes the clutch to slip. I am also kinda thinking about just buying a clutch kit and doing it at the same time though. Do the baskets usually need replacing?

This for 50 bucks kinda seems like a no brainer to do.

http://cgi.ebay.com/ebaymotors/Clutch-Kit-Heavy-Duty-Springs-TRX300EX-TRX-300EX-300X_W0QQitemZ120432649045QQcmdZViewItemQQptZMotor s_ATV_Parts_Accessories?hash=item1c0a586355&_trksid=p4506.c0.m245&_trkparms=65%3A12%7C39%3A1%7C72%3A1205%7C240%3A131 8