300 part out

[TRX-330]

I am thinking about parting my 300 out after what happened last night.
I have a ton of after market parts for it just pm me with what you want.
All prices NOT including shipping
black gusseted frame 150-200
250r a-arms 75
400ex shocks with relo 65
steel braided brake like 150 front+rear
front+rear calipers 100
front hubs 50
rear hubs 65
gray stock swing arm brand new 75 bearings
billet carrier good bearings 65
350x axle 60
300ex carb with no choke 65
air box with wholes 30
raptor rear shock 80
dg grab bar 30
+2 +4 axle i think gforce 150
fat bars with bracket 75
honda bar pad 20
race wiring 30
brand new battery 30
strait steering stem 50
stock shaved plastics are cracked 50
itp offset steel wheels 50
great shape itp mxr4 front 20 rear 18 100
8 in rear bead locks with caps 150
hmf slip on dg header 170
like 5 spare engines
One complete 330 engine
Might sell a set of houser +3 lt arms 300
Will list more later, like i said pm me with wat you want.
Feel free to call me anytime from noon till 9 (330)-727-5674 if i dont answer leave a message

http://i137.photobucket.com/albums/q208/DrptS10/300-1.jpg
http://i137.photobucket.com/albums/q208/DrptS10/3003.jpg
http://i137.photobucket.com/albums/q208/DrptS10/3004.jpg
http://i137.photobucket.com/albums/q208/DrptS10/3002.jpg
http://i137.photobucket.com/albums/q208/DrptS10/3005.jpg
http://i137.photobucket.com/albums/q208/DrptS10/3007.jpg
http://i137.photobucket.com/albums/q208/DrptS10/3006.jpg
http://i137.photobucket.com/albums/q208/DrptS10/hmf.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07268.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07254.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07250.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07249.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07247.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07267.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07263.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07262.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07261.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07259.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07259.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07253.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07252.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07251.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07255.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07256.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07257.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07246.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07260.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07265.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07266.jpg
http://i137.photobucket.com/albums/q208/DrptS10/DSC07264.jpg

[petryna]

PM sent

[dns1764]

how much do you want for the a arms and 400 shocks? what about the rear axle?

[300ex#69j]

how much for the a arms

[TRX-330]

ill take 75 for 250 arms and 60 for shocks and relo bracket. The gforce axle i will take 150 350x axle i will take 60

[300ex#69j]

what about houser arms

[TRX-330]

300 they come with tie rods and ends
idk if im gonna sell them yet

[chads300]

can i get a pic of the bearing carrier? thanks,chad

[TRX-330]

I will have to get some

[Tommy Warren]

what happened last night?????

[TRX-330]

stock 300 engine blew up and i dont want to put the 330 in it, so im gonna be selling both my 300's and all the parts. I have like 5 engine's that just need to be put together. I posted some new pics btw

[Imbroke]

could you sell me just the dg head pipe and not the hmf pipe and could i buy just the rear caliper and what condition is it in

[TRX-330]

ill sell just the rear caliper with master cylinder and everything for 50, and ill sell the header for 50 also. Just let me know what you want to do.

[ezdaar]

Price on the engines. Complete! no missing parts.
If so list the missing components.

All together and individual engines.
Especially the 330, Who built it? whos 330 kit is in it?
How many hours on it? etc..

[TRX-330]

I have my 04 bottom end with nothing wrong with it all parts there. Put a top end on it and it will run.

330 was built by me, it has a wiseco piston and a new sleeve. I have to tear the top end apart to see why it wont start, it rotates but wont start. I think it might be the timing chain.

I also have a ton of parts of engines and they are all tore apart, everything is there to build them and make perfect engines.

Just let me know what you want and ill let you know what we can work out.

[hisi]

you need to clear out your message box. I tried to send message and it is full. I am interested in the 04 bottom end or a complete bottom end!

[Imbroke]

does the rear caliper have a block of plate and what kind of condition is it in like how are the bushings and slides i am interested in the header also is it alot bigger than stock

[ezdaar]

Did yo do any clearencing on the inner cases for the 330?

I'm interested in Alot of your engine's and parts. Especially trannys.

I will pm you tomarrow with my cell # lets chat about this..

[PA250x]

How much for the header and HMF shipped? Also, will you sell just the rear reservoir? If so, how much shipped??

[TRX-330]

Originally posted by Imbroke
does the rear caliper have a block of plate and what kind of condition is it in like how are the bushings and slides i am interested in the header also is it alot bigger than stock

Yes it has the block off plate, its in good condition worked every time i pressed the pedal.

[TRX-330]

Originally posted by ezdaar
Did yo do any clearencing on the inner cases for the 330?

I'm interested in Alot of your engine's and parts. Especially trannys.

I will pm you tomarrow with my cell # lets chat about this..

all i know is that it has a 86 mm piston and with new sleeve, I thought with an 86 mm piston it was a 330. Just let me know with what you want i have a ton of parts.

[TRX-330]

Originally posted by PA250x
How much for the header and HMF shipped? Also, will you sell just the rear reservoir? If so, how much shipped??

The prices i have listed do not include shipping, but if you give me your area code i can find out what it is. I might sell the reservoir but it was melted on the pipe slightly dosent leak though.

[Dave16]

How much for a torn apart motor?

[TRX-330]

Originally posted by Dave16
How much for a torn apart motor?

Im not sure, i was ethier going to part them out or build them and sell them whole

[Dave16]

I really want to get a 300 motor and get maybe cams, piston I only have like $190 so I can't really buy much until I sell my blaster. I would like to get a motor apart so I can just drop in the stuff I need or want and put it all back together. Plus I can't find 300ex's that are for a good price around my area.

[TRX-330]

well most of the top end stuff i have is junk, I dont think i have any good cams. One of my brothers friend said most 300 have worn out cams but the web cam i had lasted forever, but i sold that to a friend. I do have a good piston and a good high comp. piston if you would like one of them. I also have a jug with the sleeve bored 20 over but the piston is junk you can find them on ebay pretty cheap though. If you want you can email me i check that more then this site. Harobiker2214@aim.com

[ezdaar]

Are the bttom ends apart?

Would like to see pics on the cog sets, the shift drum and the output shaft splines.

And whats the situation on the 330? Forsale or not?

[TRX-330]

yes they are apart, idk what im gonna do with them yet. I can get pics of all the internals for you, and im not sure about the 330. I was told it was a 330 but now people are telling me its only 30 over. I will talk to the person i bought the jug and piston off of and find out what it is.

[Dave16]

Do you have atleast a good bottom end? Maybe even torn apart?

[TRX-330]

i have a good bottom end, the only thing wrong was the chain ground out some of the case, i had it fixed by a good friend and it has never leaked a drop of oil. Its and 04 bottom end also so not too old

[Dave16]

How much for it?

[TRX-330]

hell idk they go for like 500 on ebay, but since mine was damaged then fixed i wont be able to get that much. I could prolly do 395 plus shipping.

[TRX-330]

Come one guys i need this stuff gone to get another quad before summer is over.

[01shee]

What part of ohio are you in. I might be interest in a few things for my nephews quad

[PA250x]

Originally posted by TRX-330
Come one guys i need this stuff gone to get another quad before summer is over.

PM me your BEST shipped price (17701 zip) for the exhaust. I might take that off your hands.

Thanks!

[hondaman23]

im interested in the 400ex shocks with the relo bracket and the a arms. and does the lt a arms fit the 300ex?

[TRX-330]

The 250 arms, shocks, and relo are pending sale right now idk if he still wants it though. Yes the +3 lt will fit the 300, without the use of the shock relo but you need to buy longer shocks.

Originally posted by hondaman23
im interested in the 400ex shocks with the relo bracket and the a arms. and does the lt a arms fit the 300ex?

[TRX-330]

Im in vienna, its close the youngstown.


Originally posted by 01shee
What part of ohio are you in. I might be interest in a few things for my nephews quad

[hondaman23]

like 19.25 shocks and do they come with everything

[TRX-330]

ya like 19-20 eye to eye. They come with arms and tie rods, ill even throw in the ends for nothing. With the housers i was at 50 inches with stock wheels. I will get you a better pic of them also, i just got them taken off the bike. Unless you want the 250r stuff ill sell it to you, i think this guys gonna fall through on the deal.

[hondaman23]

ok sounds good but this is for my winter rebuild and will have money during that time so idk wat u want to do

[TRX-330]

Oh well i mean if someone else shows me the money they are going to be sold to them, Im trying to get enough money to buy a 400 by mid summer.

[hondaman23]

ok ill keep in touch

[turbo appex]

ineed a set of cases in good shape a stck cam and rockers for cores i am in akron ohioabout 1hr from you my son races jr. school boy at atva nats. and may need alot more parts maybe i can come and look at what you got thanks

[turbo appex]

give my a call #330 351 9618 frank

[josh79z28]

do you have a good cdi box if so how much for it?

[TRX-330]

I think the bike may be sold as is, so parts for sale are on hold. Or i may just keep it just for the hell of it, idk yet.

[josh79z28]

ok thanks