cutting to make racecuts

[Rebelrider10177]

How do you cut the fenders to make them racecuts and not be jagged or anything?....I want it to like this

[jskance]

first put masking tape on both sides in the arc that you want to cut. Start wide as you can always take more off but cant ad once removed. use a jig saw with a fine-tooth blade and cut away. use a tape measure and check the distance from the frame at various points to make sure both sides are the same. A razor blade/carpenters knife can be used for the final touches.

lastly - ride and enjoy being able to see where your front tires are going...:)

[4TraxRider]

I used a dremel on mine, and first marked it out with an exacto knife. Seemed to work great for me.

[roostin_dale]

First mark it with a WASHABLE marker...then cut it with a dremel.
Then when your done use sand paper to make it smooth(some people use a lighter and heat it)

[RiPPiNiTuP7]

Originally posted by quad_freak14
First mark it with a WASHABLE marker...then cut it with a dremel.
Then when your done use sand paper to make it smooth(some people use a lighter and heat it)

I did it this way.

[Sparks425Ex]

I used electrical Tape to make the outline then i cut with a hack saw and filed off the edges. Then I took a high grit sand paper and smoothed off the edges.

[phatswinn]

the best way that ive founnd is breaking a hack saw blade in half and tapeing someof it for your had and cutting it that way, its more predictable and u can get a straighter line, and torch the cuts to make them shiney and stock looking

[phatswinn]

another view with my ghetto hood

[wheeltrax]

Thats a blingin ghetto hood! :o