PDA

View Full Version : Front Master Cylinder


jlrenken
06-08-2009, 09:05 PM
does anyone know what master cylinder that the pros are running for the front brake.
grannysleeper
06-08-2009, 09:22 PM
Hey, check out this link, it's an older article, but they talk about the master towards the bottom of the page.

http://atv.off-road.com/atv/article/articleDetail.jsp?id=567453&pageID=2
ProConcept
06-08-2009, 10:54 PM
Honda master cylinder
Blizzard24
06-09-2009, 04:22 AM
Yep Honda Master Cylinder, but you have to switch out the brakelines as well. The Banjo is facing the wrong direction so you have to switch over to a standard banjo, like Streamline brakelines.
jlrenken
06-09-2009, 06:29 AM
when u say honda do u mean 300ex 400ex or 450r quad or dirtbike and is it just a stock one or do they tweek it any.
thanks guys
jamie
Blizzard24
06-09-2009, 07:15 AM
Stock Honda... I think all sport models are the same, no tweaking at all, bolt up, add brakelines and bleed.
ds450racer
06-09-2009, 03:01 PM
if thats to do with the problem with brake fading i have found another option. I use the highest dot brake fluid i could get hold off. its what they use in the drift cars. had no problems since.
jlrenken
06-10-2009, 06:40 AM
no not do to fading but the big hole where u can screw in a mirror. i would like to get one that has nothing to it to save alittle room.
thanks