Roll Design 250R May Part out

[schiavo250r]

I may Part out only if chassis sells. I will post pics later. Quad is like new. Best of everything. Axis shocks, Roll Chassis.....

Let me know what you need. Pics Tonight.

Sparks Exhaust
White Plastic
Axis Shocks
+4 Roll Front end
Roll no link swinger
Team Axle and hubs
Antifade
Radiator
Brake Systems

[Fear250r]

Exactly what exhaust is that? Big bore? Mx or TT?

[rhinorick]

would you like to trade it for a very clean low hr 2006 trx470er dyno was at 3000 feet

http://i15.photobucket.com/albums/a361/atvriderz/Picture003-5.jpg
http://i15.photobucket.com/albums/a361/atvriderz/4-24-2.jpg
http://i15.photobucket.com/albums/a361/atvriderz/DSCF2244.jpg

[skippy1999]

i have interest in the white plastic.. as long as its not race cut.

anti fade, bolt kit

[Master LTR450]

he probably doesnt want to trade but i cant guarantee that. someone needs to buy this bike complete or the chassis. lets hear some prices though Jim.

[skyeryder]

I want seconds on the plastic if it's full fronts

[Mony25]

How much you looking to get for the complete chassis. doubt im interested since i just bought a roll about 2 months ago but maybe could get the fiance to let me spend more.

[schiavo250r]

these are current pics I have 2 rolls not sure what i AM going to do yet. This one I want to sell or part I think it does not have the 340 pv motor but it is 265. Here are pics.

[schiavo250r]

I do not want to trade unless it is for a walsh CRF. I have to many projects going and need the room. Let me know what you guys need more pics avail upon request. Email me schiavo250r@aol.com. Will sell this one complete for 5500.00

[8686]

Will someone please buy this immediately so I don't spend more money.:D

[Master LTR450]

Originally posted by 8686
Will someone please buy this immediately so I don't spend more money.:D

U should just buy it!! What's another toy

[norcalduner]

If your dogbone clamp is a Roll, I will buy it for sure. Let me know. Also, if you have a decent swingarm skid for that, I will also take it.

[250Renvy]

I'll give you $3800 for it?:rolleyes:

[schiavo250r]

Of course you would! LOL

[schiavo250r]

anyone

[hondamancbr03]

How much for the frame? I have an LRD attitude that I would like to replace with a Roll Design frame.

[8686]

Originally posted by hondamancbr03
How much for the frame? I have an LRD attitude that I would like to replace with a Roll Design frame.

If you buy the frame, you need the a-arms, steering stem, and swingarm also. They are all specific to the Roll Design Lobo chassis.

[schiavo250r]

He is right plus it doesn't pay. By the time I seperate all that.

[hondamancbr03]

My R has all Roll design parts plaster all over it (a-arms/swing arm/steer steem)....Except for the frame which is the LRD attitude. That is why i'm looking for a Roll Design frame. It's probably not worth your while to seperate everything, so i understand if you're looking to sell the complete frame/suspension package.....

[Master LTR450]

Originally posted by hondamancbr03
My R has all Roll design parts plaster all over it (a-arms/swing arm/steer steem)....Except for the frame which is the LRD attitude. That is why i'm looking for a Roll Design frame. It's probably not worth your while to seperate everything, so i understand if you're looking to sell the complete frame/suspension package.....


Those parts still won't work on a lobo chassis. Everything is built specific for that frame. You would also need the rear shock since this bike is a no link.

[hondamancbr03]

As they say....You learn something new everyday!....Thanks for the heads up, i'm looking for a frame so i want to make sure all my current Roll Design suspension will swap over. Any suggestion on what frame to go with? I've notice that after market R frames are becoming difficult to locate.
Thanks again!

[Motofool250r]

HRE still makes frames i believe and they are good stuff, lonestar still makes frames and so does walsh.

[woodsracer144]

PRP!!!

[250Renvy]

You'd want any aftermarket frame that uses stock geometry - LSR, Laeger, Arens.

Just curious, why you don't want your frame? You have a nice Aluminum frame, the only difference between yours and something you'd replace it with is that the replacement would be made of chromoly.

[woodsracer144]

Originally posted by 250Renvy
You'd want any aftermarket frame that uses stock geometry - LSR, Laeger, Arens.

Just curious, why you don't want your frame? You have a nice Aluminum frame, the only difference between yours and something you'd replace it with is that the replacement would be made of chromoly. since you brough this up.. and no to jack the post but who will weld chromoly? i have a cracked swinger and need it fixed...

[hondamancbr03]

Originally posted by 250Renvy
You'd want any aftermarket frame that uses stock geometry - LSR, Laeger, Arens.

Just curious, why you don't want your frame? You have a nice Aluminum frame, the only difference between yours and something you'd replace it with is that the replacement would be made of chromoly.

Thanks for the info, I just purchased this R and could use all the FYI's you have to offer......I'm looking to sell the LRD frame because i consider myself an aggressive rider, i fear i may break the frame. I stopped by LED to show Arlen (from LRD/LED) the bike since it has his frame and engine, he suggested that if I'm the jumping type that i may consider going with a different frame (chromoly)....Jason from LED said my frame is the type you hang on the wall just to look at:)

Do you have any knowledge on these frame? Am i worrying for no reason? I would like to keep the frame it just seems like it would be better for the 100yrd runners.

[Motofool250r]

your frame was a limited run set of aluminum frames, they are light and special run it till it breaks n then get er welded. i wouldn't mx it but just normal iding no problem.


woods racer any high quality welding shop or pressurevessel shop should beable to handle the wleding task easy.

[woodsracer144]

Originally posted by Motofool250r
woods racer any high quality welding shop or pressurevessel shop should beable to handle the wleding task easy.

i cant find any one :(

[Mony25]

Im interested in the nerfs and how much for the chassis.

[thedeatons]

Typically people weld chromoly with steel rod. It welds just like steel. We did it when we built my daughter's chromoly swingarm...

Just take it to a good welder, and tell him it is steel. It will weld just fine.

[schiavo250r]

Well looks like I AM GOING TO START THE PART OUT PROCESS. LET ME KNOW WHAT YOU GUYS WANT.

[ehorst33]

what you want for the tires and rims, prefer the rears but will consider both 44691

[schiavo250r]

pmed you