PDA

View Full Version : A-arms 06 fit 04?


sunco
06-01-2009, 05:00 PM
not sure if they are all the same - let me know thanx

looking to replace them on the 04 -top & bottom w/ these 06's if they are the same
fastredrider44
06-01-2009, 05:30 PM
Stock, you need to keep the 04 control (upper) arms. Aftermarket varies by brand.
sunco
06-01-2009, 05:32 PM
yea- the 06 is all stock stuff
the Z Man
06-01-2009, 08:35 PM
If you change arms you want the 04-05 spindles.
the predator
06-02-2009, 06:43 AM
if they are ful adjustable arms they will work, you just don't have much camber adjust on the 04/05 if your using 06+ arms.
sunco
06-02-2009, 08:25 AM
i HAVE STOCK A ARMS ON THE 04 & LOOKING TO PUT STOCK 06 A ARMS ON THE 04 RIDE
fandl450r
06-02-2009, 08:34 AM
You would have to use the 06 spindles to use the 06 upper and lower a-arms. If you keep the 04-05 you would need to use the 04-05 spindles. Simple as that.
sunco
06-02-2009, 09:56 AM
well then ok, thats what I was looking to find out. I have 2 450's ones an 04 & the other is an 07.

Found a dude selling stock 06 a arms. Our 04 needs new bushings but to get his is cheaper & easier.

Thanx for the help men ;)