width to 50" -- blaster

[BakerRacing40]

i've been doing a lil research on here and five pages in i'm still not sure.. lol
what i'm needing to know is how to get as close to 50" wide. what size a-arms and what size axle?
and what width do you get with different stock yamaha axles? yfz raptor banshee?
and what's the deal on 400ex hubs on yamaha axle?
thanks

[headache]

+3 a arms with -2+3 front wheels would put you right about 50" wide in the front. A banshee axle with maybe a 1" per side spacer would also get you close to 50 with +5 rear wheels. I'm not sure bout the honda hubs but i have heard that 300ex hubs will fit the rear. 400 prob would too if the 300 will.

[mxblastermx]

the g-force axle will with stock offset rims will bring you right to 50 inches,the 300 and 400 hubs work if you want to run a honda rear rim and they add about an inch and a half on each side, itheres also good used a arms on ebay that go for pretty cheap i got some snyder +3+1 long travels for 300, and g-force axles are 200 brand new, shocks you can always find on ebay.