View Full Version : pro taper bars, will these fit?
muddy400EX
05-30-2009, 09:55 PM
wanting to get pro tapers and im confused with the different mounting kits, will this kit fit up to the ltr?
http://www.magicracing.com/Pro-Taper-Contour-Handlebar-w-Universal-Mounting-Kit_p_1549.html
muddy400EX
06-02-2009, 08:27 PM
anyobody? i know alot of you guys have pro tapers. is this the kit you all got???
xtreme 250x
06-02-2009, 08:31 PM
I don't know if this helps but all you need to do is make sure if you buy 7/8 bars you have the right clamp or if you buy oversized you need the right clamps.
stoopidbot
06-02-2009, 08:43 PM
Originally posted by muddy400EX
anyobody? i know alot of you guys have pro tapers. is this the kit you all got??? I can't imagine they would call it a universal mount if it didn't work for all the major systems.
atveric132
06-03-2009, 01:50 PM
they will work but there crap
sha_rob_27
06-03-2009, 03:58 PM
yah...i agree with eric...i have the same exact tag setup right now...they work for a while, but i am planning on going with a new stem...they just bolt on top of the stock clamp bottoms...
Drewltr450
06-03-2009, 04:00 PM
Ive had them for 2 years and love them
muddy400EX
06-03-2009, 04:54 PM
ight thanks dudes. just making sure before i ordered them. i noticed tag actually has different mounts for each quad, so just wanted to make sure:)
atveric132
06-03-2009, 06:53 PM
on both my bikes a have a +1 stem with anti-vibe clamps and cr hi pro-taper bars. ive had flex bars and pretty much every setup but i always like this a little better.
muddy400EX
06-04-2009, 01:40 AM
ya i want fatbars, but i dont want to raise the bars. i hate high bars! lol
jkiserracing
06-05-2009, 09:23 PM
I bought a fuelatv oversize bar clamp which bolts on the stock stem without raising it up. Then you can mount up any oversize bar you want to use....
muddy400EX
06-06-2009, 08:31 PM
Originally posted by jkiserracing
I bought a fuelatv oversize bar clamp which bolts on the stock stem without raising it up. Then you can mount up any oversize bar you want to use....
there we go! i knew someone had to make a clamp like that, lol. thanks dude:cool:
jkiserracing
06-08-2009, 07:45 PM
no problem.....but you may need to call them to order one because they are making a diffrent one for the 07 and up stock stems which are diffrent than the 06 stems (i think 07.....maybe 08....just call them anyway to find out) mine worked awesome
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.