PDA

View Full Version : AIR SCREW LOCATION?



08-02-2001, 05:41 PM
Could someone please clarify the location of the air screw on the stock carb for me please?

Also like when you see advice on "2 +/- ½" as setting does this mean you screw it all the way in, "bottoming it out" then backing out 2½ turns?

any help would be greatly appreciated, thanks

Chadwick

08-02-2001, 06:20 PM
Chadwick,

Actually, there technically is not an air screw on the stock keihin carb.

There is an idle mixture screw, which I think is what you have in mind, but it is a fuel screw. Difference being you are changing fuel input on the slow circuit rather than air input. So, if you back it out, you will richen the slow circuit mixture, and if turn it in, you will lean the slow circuit mixture.

It is located on the bottom of the carb - engine side and center. Suggestions such as 2 turns out mean precisley what you suggest. Lightly seat the fuel screw by turning it all the way in, then count the turns out from there.

Hope this helps!
Dana

08-02-2001, 08:55 PM
Thanks Dana!....I'll be sure and check it out in the morning.

Chadwick

08-04-2001, 12:00 PM
I turned out this screw out a half turn and I can start my 400ex with no choke. This is awesome, because I always had to use it, even in the summer time.