PDA

View Full Version : Fox Suspension Setup



Harkes2k
05-26-2009, 02:18 PM
Anyone got a somewhat middle baseline I can go off of for suspension settings for a set of front and rear DSC for the DS? They were absolutely horrible for me at my race last weekend and right now anything would be better than that... Thanks, Chris.

ltr311
05-26-2009, 03:51 PM
Depends on what you weigh and such. Call fox and they will give you baseline setting for your weight.

For example I weight 185

Main chamber I have 40lbs. this is for height. I have mine at 7.25inches in the front

Evol chamber I have 175lbs.

As far as high and low speed. i try and leave them as close to the middle as possible. I think I have my high speed up two clicks from the mid point and my low speed down to clicks from the mid point.

Hope this helps. Good luck.

Harkes2k
05-27-2009, 02:53 PM
How about your rebound?

cheryl bithell
05-29-2009, 11:56 AM
Do you have Fox Floats For the stock aluminum a-arms or M-x a-arms, or other.

For stock a-arms i run front rebound 12 clicks out from full in, from my experience these shocks work great, but are tricky to get right.

Harkes2k
05-29-2009, 01:48 PM
I am running Houser A-arms.