first build need help!!!

[timfo1]

i put my swingarm on but not sure if the way it is fitting is correct.
if i push it to one way there is a .075 gap or so.should it not have this gap or is it fine?

[timfo1]

anyone?

[LONG-ROD]

are you saying there is play in it left to right?

[05LSR250R]

Should have no play in the swingarm pivot area! Post pics if you can!

[timfo1]

yeah the play is left to right.. i will try and take pic..

[Aceman]

You've got all the collars in?
You've tightened up the pivot bolt?

[timfo1]

everything is in..i didnt tighten bolt yet u think it will squeeze it that much?

[rigger]

If you are talking about space between the frame and the swing arm, there should be none. You have got to be missing parts. Post a picture and we may be able to help a little more.

[Aceman]

I don't know, that's why I'm asking.

[timfo1]

when i tighten bolt it fits tight but i dont think that is how it should be...i am using these delrin bushings and even when i use regular parts i still get the gap... any ideas???
http://i389.photobucket.com/albums/oo337/timfo/swinggap.jpg

[05LSR250R]

Looks like your missing the stock dust caps!

[LONG-ROD]

ya, should have the metal caps with the seals in them. should be 4 total.

[DEERCHOOPER]

do you have the same gap on the other side?

is there a bearing in the swinger as well or just bushing all the way threw?

.