PDA

View Full Version : Help with a few questions



06 Honda 450R
05-17-2009, 10:31 AM
my brother bought a xx and he wants to change the wheels to regular sizes, what size would i need, what size of itp bajas would i need, and what kind of tires are good for all around, trails, fields, gravel, i was thinking razrs or what, also he will be wanting exhaust and a programmer, will he need a programer, if he does what kind should i get and what kind of exhaust should he get, thanks guys, i rode this beast and its amazing...

06 Honda 450R
05-17-2009, 10:36 AM
also, what skid plates should he get,

stoopidbot
05-17-2009, 10:47 AM
Unless he goes with a pretty big offset he needs 11" rims for the back. They are needed to clear all the junk in the trunk.

sprayedgt
05-17-2009, 03:15 PM
Not sure of the size, but he'll have to check to see what fits it properly. IMO nothing looks worse than wheels on a ATV with a stupid not model specific offset. As far as exhaust one word YOSHIMURA! I have a yoshi on both Honda's and 2 street bikes and they are great. You will not find better quality anywhere. Skid plates just stay away from the cheap Chinese made Pro Armor and you'll be fine.

stoopidbot
05-17-2009, 05:41 PM
2 brothers makes an amazing exhaust system for the XX

ceballos400
05-17-2009, 10:12 PM
IMO..... Razr2s, stock offset on the wheels... OMF makes some sick ones... HMF on the exhaust with a PCIII or PCV programmer... and nothing beats PRM on skids

5W0P3
05-19-2009, 11:47 AM
RZR2's for tires, but you can't get them in an 11" wheel. You can get them in a 10" wheel but make sure you have the right offset.

Yoshimura on the exhaust! Two Brothers are too loud for me.

ceballos400
05-19-2009, 05:23 PM
you CAN get the razr for the rear.... call maxxis and find a dealer nearest you.... matlock runs them...

5W0P3
05-19-2009, 05:27 PM
Originally posted by ceballos400
you CAN get the razr for the rear.... call maxxis and find a dealer nearest you.... matlock runs them...

RZR's yes. Not RZR2's.

stoopidbot
05-19-2009, 05:28 PM
Originally posted by ceballos400
you CAN get the razr for the rear.... call maxxis and find a dealer nearest you.... matlock runs them... Just cause Wayne runs them doesn't mean they are available to the public. Unless they finally released them.

5W0P3
05-19-2009, 05:30 PM
Originally posted by stoopidbot
Just cause Wayne runs them doesn't mean they are available to the public. Unless they finally released them.

The regular RZRs are released, but go out of stock pretty quick.

stoopidbot
05-19-2009, 05:32 PM
I stand corrected. The Rzr is available in 11" rim.

06 Honda 450R
05-25-2009, 02:58 PM
also, those of you who have the 10x8 wheels, what kind of wheels do you have

scuzz
05-26-2009, 08:13 AM
ITP's from Rocky Mountain ATV.

BE WARNED THOUGH

ITP's seem to bend really easy (check the feedback section of rocky mountain atv...and you'll see.

Anyway, the ones I have I put paddle tires on for the dunes. The clearance with these rims between the rim and the a-arm is 1/4 of an inch. So if you bend them the will contact the a-arm.

See:

http://i82.photobucket.com/albums/j254/gwwaddle/TRX700XX/100_9266.jpg

06 Honda 450R
05-26-2009, 11:57 AM
so yours are itps, i couldnt find any 4/144s on parts unlimited but feedback would be nice, where did you get your rims

scuzz
05-26-2009, 11:58 AM
Originally posted by 06 Honda 450R
so yours are itps, i couldnt find any 4/144s on parts unlimited but feedback would be nice, where did you get your rims

Rocky Mountain ATV

06 Honda 450R
05-26-2009, 12:05 PM
how much did you get them for btw thanks

scuzz
05-26-2009, 12:13 PM
Here's what I ordered:

DO NOT GET THE SAND SNAKES, THEY WERE GARBAGE.

20x11x10 Sand Snake on ITP .190 T-9 Pro Series Polished - 2008 Honda TRX 700XX (1 item(s) Gift Wrapped) Part# 1090270011 258.80 1 $258.80
…AMS Sand Snake 20x11x10 (2 per pkg.) 2
…4/144 ITP .190 T-9 Pro Series Wheel 10X7 4.0 + 3.0 Polished (2 per pkg.) 2